PECHORIN'S home   account   archive   eshop   globalmediapro

Post new message

Home | First message in thread | Previous message

Re: Re: Re: Re: My Camcoreder Broke

Peter Zahm Posted Nov 10, 2003, in response to:Drol

Well I'm back, Not as much sucess as you have had. I'm not sure what you mean by "release pin" I took the door off with the 2 screws. Looking to the left of the tape I see a spring, some thin metal tabs, I can also see the button that you would use to eject the tape under normal circumstances. I tried what you said also regarding the back up battery. Remove, re-install, replace. Even with the power supply plugged in during each of these steps the tape still wont come out. Any more detail you can give re the release pin would be greatly appreciated. Thanks in advance for your time. PZ


Share |
1 comment

    Next to the spring that small metal tab you see is the release pin I spoke of. If you get a small screw driver and pri the tab upward (gentle) you will notice the door assemble pop up a little. For me anyway, this gave me enough room to slowly work the tape out.



© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed