Nuvi SPEC B/W CCD CAMERA. Looking at the back. 2 connectors on back, "monitor" on left and "aux" on right. There are 6 square holes in each connector. 2 on each side and 2 on bottom. The left "monitor", second pin down on right side is Video out. On bottom the right pin is +12 Volts. On the left side, second pin down is ground. On the "AUX connector, the second pin down on the right is ground. On the bottom, the right pin is +12 volts. +12 V power must go to both pins below. Power draw at 10V is 138 ma., at +12V is 152 ma, at +14V is 175 ma. Camera starts to fail below +10V. Havent tried to find the mic output yet. Still dissasembled on bench. Focus down to 18". Dont know resolution. You should put a 1/4A fuse in the power lead, just in CASE! Plug video into a VCR and onto a TV. Anyway this is what I have discovered to date. Bob

Reply