PECHORIN'S home   account   archive   eshop   globalmediapro
.
.


Post new message


Home

Condensation and "E0" Error Fix

mrclean65 Posted Jan 20, 2005

Condensation and "E0" Error Fix For JVC Mini-DVs

For those of you, like myself suffering the neverending problems with your JVC Mini-DV's, I believe I may have solved one problem and possibly more. I was having chronic problems with the Condensation and Clean Head errors. JVC was no, and I mean NO help. This is for those that are at the end of their ropes. Keep in mind that this is a last ditch fix. I removed every single tiny little screw on the exterior case. All the screws on the inside of the viewer abd also there is one inside the S-Video flap if yours comes equipped. There is also a screw on the top on the piece in front of the eye viewer. Carefully, and I mean carefully, seperate the pieces. Inside there are a few connectors that connect the two halves. The one closest to the rear (thumb switch), if unplugged will do a "hard reset". Leave unplugged for about 5 minutes (atleast that is how long I left it unplugged). You will have to reset time and date and settings but, this has, atleast for the time being solved both of my problems. And they were problems that popped up everytime I turned on the camera. It progressively has gotten worse over the last few months. and was totally unusable for the last 3 weeks. I have now been error free for over a week. Hope this helps someone. Please let me know if it does.

Reply

Share |
0 comments



  


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed