PECHORIN'S home   account   archive   eshop   globalmediapro
.
.


Post new message


Home | Previous message

Re: KD-G200 Clock Setting

Eric Posted Jun 08, 2005, in response to:nicole

Press and hold SEL (Select) for more than 2 seconds. "Demo", "Clock H", "Clock M", "Dimmer", or "Amp Gain" appear on display. Set the hour. Select "CLOCK H" (hour) using the CD Track Forward\Reverse buttons on the bottom right side. Adjust the hour by turning the knob on the left side. Set the minute. Select "CLOCK M" (minute) using the CD Track Forward\Reverse buttons again. Adjust the minute by turning the knob. Finish the setting by pressing the SEL (Select) button. To check the current clock time or change the display mode, press DISP (Display) repeatedly. During power off: The power turns on and the clock time is shown for 5 seconds, then the power turns off. To view the complete operating instructions go to the link and type in your model number. http://books.jvcservice.com/

Reply

Share |
0 comments



  


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed