PECHORIN'S home   account   archive   eshop   globalmediapro
.
.


Post new message


Home

nutone im3303

ed burke Posted Nov 17, 2006

ic message/im3303

recieving the ic message with im3303. was told to turn the speakers to off and then turn on one at a time to find the station that was bad. ended up turing all the speakers off and it still gives the ic message and turns on the radio. might be doing it when the furnace or some other surge in power takes place. any ideas ed

Reply

Share |
1 comment

    Re: nutone im3303

     Robert Sutherland Posted Nov 19, 2006

    Ed, You may have to disconnect one pair of wires from each sub-station. I believe there are 3 pairs (orange, black and red) to each sub-station(except the door speaker). Im not sure which pair to pick. Maybe tech support @ Nutone can help. Otherwise, try one pair at a time on one station at a time. That way, you won't forget wich screw terminal is which color(or have to draw a diagram). Good Luck, Bob

    Reply




  


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed