The following fixes and improvements have been incorporated: 1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the busy indication remains lit in the viewfinder. Some cameras with firmware Version 1.0.5 or earlier are affected by a phenomenon where the LCD monitor does not display, the shutter does not release, and the busy indication remains lit in the viewfinder. This firmware corrects this phenomenon. 2. The message, "Err 99 Shooting is not possible. Turn the power switch to and again or re-install the battery", appears on the camera's LCD monitor, and after the above operation is carried out, the LCD monitor displays in a language that is different from the actual language setting.