Re: Error Codes Assistance

I have a VCR Panasonic NV-SD-260,
From time to time the error codes "F03" and "F04" appears
in the display, and the vcr shuts down
Can you help me?

Reply

• Re: Re: Error Codes Assistance
  peter
  - 7th Dec 2004 18:11
  I have same problem on nv-sd-200
  
  
  • Re: Re: Re: Error Codes Assistance Kristian - 3rd Jan 2005 23:01
    I have the same problem with my nv-hd670. If somenone comes up with a solution pleas mail me
    
    
• Re[2]: Error Codes Assistance abraham - 2nd Aug 2005 8:54
  I have an nv-f700 with the same problem did you find a solution
  
  
• Re[2]: Error Codes Assistance Sefa - 17th Jan 2006 23:42
  When I set my NV-HD670 video on timer record and switch it off over night, I get an error of F14, were the VCR switches off and doesnt activate with the timer record.
  Please advise of help
  thankyou
  
  
• Re[2]: Error Codes Assistance
  CS2000 from digivideo.fi
  - 20th Jan 2007 1:32
  www.hamradio-badarc.co.uk/video/vcr/panvcrprt1.htm
  Panasonics technical service succes following:
  
  Panasonic K deck F03 or F04 shows in display check loading motor coupling pt no VDP1434 or motor pt no VID12128 £11.95 CHS
  
  it means. Motor that takes the tape to recorder has died, and need to be changed.
  
  
• Re[2]: Error Codes Assistance
  Festus m Ngeerah
  - 4th Nov 2008 13:05
  my panasonic vcr NV-SD225 can not input a cassette and shows FO4 error. how do i solve it?
  
  
  • Re[3]: Error Codes Assistance
    Assistance
    - 18th Jan 2009 11:18
    1). U10 Dew formation Wait until the indication disappears. 2). H01 After cylinder lock is detected, the cylinder does not start rotating again even after tape unloading. Check the cylinder-motor drive circuit. 3). H02 Cassette tape is not wound up during tape unloading except Eject mode. Check the capstan-motor drive circuit. 4). F03 Mechanism locks during mode transition except Eject mode. 1. Check the loading-motor drive circuit. 2. Check the mechanism phase alignment. 3. Check the Mode Switch. 5). F04 Mechanism lock during tape unloading. 1. Check the loading-motor driveї circuit. 2. Check the mechanism phase alignment. 6). F05 Cassette tape is not wound up during tape unloading in Eject mode. 1. Check the capstan-motor drive circuit. 2. Check the Supply/Take-up reel pulse. 7). F06 Mechanism locks after tape unloading in Eject mode. 1. Check the loading-motor drive circuit. 2. Check the mechanism phase alignment for Cassette Holder Unit. 8). F09 No serial clock transmission between IC6001 and IC7501. Check the serial clock circuit.