|PECHORIN'S home account archive eshop globalmediapro|
SR-VS30E / HR-DVS3EU firewire driverTim Postma Posted Nov 06, 2004
looking for IEEE1394/firewire driver under Windows XP SP2
Windows XP professional with SP2 doesn't recognise my JVC SR-VS30 deck on the VIA OHCI IEEE/firewire port. He PnP as a AV/c tuner. A driver is needed.
favor nesecito driver para win 7
Windows XP professional with SP2 does have the driver for JVC SR-VS30 deck installed! I also have a VIA OHCI IEEE/fire wire port, and I solved the problem as follows: I connected the SR-VS30E to the FW, turned the deck on, and opened up the device manager. I right clicked and uninstalled everything in the Imaging Device, as well as the AV/C Tuner. In the device manager, I opened Action-Scan for hardware changes. When it detected the device, I pointed the wizard to: install from list – don’t look, I will chose the driver - next. In the device list, I chose “show all devices” and after this I chose JVC – JVC DV Tape Recorder/Player. I ignored the warning by windows not to install and installed it any way. A bug in the SR –VS 30 PnP information code, probably induces the warning in Windows. By checking the device manager again, I found out I have solved the problem. Good luck.
Hi, I have the same issue as the OP but I'm running Vista 64....the advice that worked above is apparently not for Vista 64....any suggestions? Thanks very much, Randy
Don't wotty. Without driver it works too
I have the same problem. Have you found a solution. If so, please tell me how. greetings Willem