PECHORIN'S home   account   archive   eshop   globalmediapro
.
.


Post new message


Home | Previous message

Re: JVC KDS630 Clock Change

Jennifer Amerson Posted Apr 08, 2006, in response to:Jennifer Amerson

Eric7828@aol.com was nice enough to send me this regarding the clock time on my JVC KD-S630. I encountered another problem before Eric sent this to me regarding the Area/Area US displaying instead of the "clock" options. As a result in tyring to get rid of the area/area us screen I was able to get the clock thing working again. I'm not sure if these directions will work since I was able to get it going without them but I will post them in case someone else has the same problem. Thanks Eric. Step 1. Press and hold SEL (Select) for more than 2 seconds. (Clock H, Clock M, SCM Link or Level appears on the display). Step 2. Set the hour (select clock H if not shown on the display and adjust the hour). Step 3. Set the minute (select clock m and adjust the minute) Step 4. Press SEL (select) to finish the setting. To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press teh button the display mode changes as follows: During tuner operation Frequency Clock During CD Operation Elapsed playing time Clock *If the unit is not in use when you press DISP the power turns on, the clock time is shown for 5 seconds then the power turns off.

Reply

Share |
0 comments



  


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed