NUTONE INTERCOM SYSTEM

nutone,broan,sony parts

WE ARE AN AUTHORIZED NUTONE,BROAN ,AND SONY SERVICE CENTER IN SAN ANTONIO ,TX.WE SALE -SERVICE NUTONE INTERCOM SYSTEMS.PLEASE FEEL FREE TO E-MAIL US FOR ANY NUTONE,SONY PARTS. MOTORS, HEATERS,VENTS ETCC...

Reply

• Re: NUTONE INTERCOM SYSTEM beth - 4th Nov 2003 4:56
  how do u connect a cassette playing system to the nutone music intercom 3003?
  
  
• Re: NUTONE INTERCOM SYSTEM Jim Jorde - 21st Nov 2003 22:45
  I have a K1350 vintage 1989. I sent it in to be serviced for clicking, the door chime didn't work and I could not set the clock. After $145 in repairs it still does the same thing plus I can't get two of the 8 speakers to work. It is drving me crazy...any ideas?
  
  
  • Re[2]: NUTONE INTERCOM SYSTEM
    Steve
    - 10th Nov 2008 3:16
    I just replaced my 3003 with a 3303 because my 3003 wouldn't get very loud. The 3303 fits in the same spot as the 3003, but does need a new bracket because it has 2 transformers. I got both for about $350 on ebay. It is a good upgrade, and probably better than putting money in the old one. The old speakers also work the the 3303.
    
    
• Re: NUTONE INTERCOM SYSTEM Rob Thomas - 13th Dec 2003 16:59
  I have just bought a house with a Nutone intercom scovills system and I need to purchase a speaker grille for the center section of the switch plate. Also I need the little plastic grommits that hold the Plate to the unit. Are these available anywhere? I know the unit is very old. I would appreciate any help you can give me.
  Rob thomas
  
  
• Re: NUTONE INTERCOM SYSTEM
  Randall Hardin
  - 16th Dec 2003 3:48
  Sirs:
  I am in need of a schmatic for a Nutone Model IMA-203 intercom. Would you be able to supply?
  Thanks,
  Randy
  
  
  • Re: Re: NUTONE INTERCOM SYSTEM
    MARC
    - 4th May 2004 4:25
    I also need a schmatic for a nutone IMA-203, Thanks Marc
    
    
  • Re: Re: NUTONE INTERCOM SYSTEM
    Peter Gronet
    - 5th Aug 2004 9:17
    I am looking for operating instructions along with a schematic for the IMA-203 central intercom system. Are either available? Advanced thanks, Peter
    
    
  • Re: Re: NUTONE INTERCOM SYSTEM Steve Grout - 24th Dec 2004 8:36
    I need the schematic for a Nutone 'Scovill' IMA-203. We had some lightning nearby, and our intercom had some damage. I am only getting a modest hum at max volume. Thanks for your help, --grouts@earthlink.net
    
    
• Re: NUTONE INTERCOM SYSTEM
  letitia wills
  - 16th Dec 2003 22:07
  what is your price for a IM3303 system (biscuit)with 104 rough in. 2inside speakers IS335 with rough in. 1 outdoor speaker 339(woodgrain) and door speaker,chime module IA28 and intercom wiring.
  thanks
  
  
• Re: NUTONE INTERCOM SYSTEM PHELIX ROBINSON - 17th Dec 2003 21:45
  I have a nutone model im2003 installed in my home. Since this is an older three wire, discontinued model, how do i replace it without rewiring my house.
  
  
• Re: NUTONE INTERCOM SYSTEM
  Willy Weyhe
  - 21st Dec 2003 1:16
  hello i am in need if a apartment intercom door release unit model #484-b for a 475 control unit do you have or can you get such an item or do you have schematics available for me to repair it thanks for your help
  
  
• Re: NUTONE INTERCOM SYSTEM
  Margaret Logwood
  - 13th Jan 2004 22:36
  Do you have the schematics on a 3303 intercom system.
  
  
  • Re[2]: NUTONE INTERCOM SYSTEM
    Robert Burdoin
    - 8th Feb 2007 16:29
    Were you successful in obtaining schematics for the IMA 3033 I/C System?
    
    
    • Re[3]: NUTONE INTERCOM SYSTEM
      Robert Burdoin
      - 18th Dec 2007 23:14
      I never received schmatics of the system I requested.
      
      
• Re: NUTONE INTERCOM SYSTEM
  Hilda Harnack
  - 16th Jan 2004 21:51
  Dear Sir/Madam:
  I would like to know if you carry an intercome system (four speaker units and a door intercom)that would replace the three-wire Nutone Scoville model installed in my house 16 years ago. If so, please let me know what my options are and their prices. THANK YOU VERY MUCH.
  
  
• Re: NUTONE INTERCOM SYSTEM Charles Sparenberg - 17th Jan 2004 23:41
  I have a 2090 or 2091 Master station.I have a Model 2028-8 5" speaker that is broken. Would you have a speaker like that or one that would be compatible with my system. I want the complete speaker unit not just the speaker. Also do you still have parts for this system or do you know anybody that does? I noticed above that a person had a vintage 1989 syetem. I installed mine in 1969 and it still works.