JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions gaetan brousseau - 24th Aug 2007 12:25
  I have a video jvc hr-s9600u a beautifull machine...I love it
  a probleme occur recently..after unplug the unit ,it took hour to set is time
  and now when power on it shut off tree second later.. I remove the mecanic parts completely for the cassette player , it does the same but five second
  later it shut off again ... the hour is shown correctly the picture for the channel is ok the menu is ok all this during five second and shut off..can not see for cassette playing because shut off to fast .is there is a way to keep this video( on )by shorting a pin or liffting a pin on the cpu or somewhere else ? thanks for the answer i am anxieux to receive a solution Gaetan
  
  
• Re: JVC service or questions JVC HXD7
  Mike
  - 25th Aug 2007 2:39
  My son Jason has a stereo unit and the msg Protect comes on and the unit powers down. Could you help him with this.
  
  Thank you
  
  Mike.Kern@distributel.net
  
  
• Re: JVC service or questions
  jonas diethelm
  - 25th Aug 2007 10:52
  hello
  
  our camcorder doest work since it startet to show "E03 eject and reinsert tape, unit in safeguard mode" after once a tape got dameged.
  
  is there a way to get it back working?
  
  
  • Re[2]: JVC service or questions
    JB38
    - 25th Aug 2007 13:57
    E-03 is always an indication that there is a problem with the cassette take up spindle, if the error still shows up even with another tape being used then its obvious that the spindle is not turning properly and which will require a more detailed examination, this only possible by separating the casing. Although this may, or may not apply in your particular case, it should be pointed out that only JVC - Panasonic or Fuji tapes should be used in JVC camcorders and never Maxell or TDK tapes, as in service circles its common knowledge that using these brands of tapes can frequently be the cause of drive problems on JVC devices, this due to the composition of the tape dust deposited on the mechanism from these brands. As a long shot, with the cassette holder open you could try blowing cool air into the mechanism for about a minute or so with the aid of a hairdryer on its cold or cool setting.
    
    
• Re: JVC service or questions Santiago - 26th Aug 2007 17:46
  Hi, I lost my manual for my Digital Video Camera GR-DV M70 mini DV, can you help me.
  Thanks
  Best Regards
  Santiago
  
  
• Re: JVC service or questions santiago - 26th Aug 2007 17:49
  Hi I lost my manual for my Digital Video Camera JVC GR-DVM70 MINI DV. CAN YOU HELP ME.
  THANKS
  SANTIAGO
  
  
  • Re[2]: JVC service or questions
    JB38
    - 26th Aug 2007 17:58
    Link sent for PDF download.
    
    
• Re: JVC service or questions Bill Farrance - 26th Aug 2007 22:36
  Hi
  
  I ran across your post offering JVC video camera support. I have a JVC GR-520 and I keep getting safeguard errors. What do i do?
  
  
• Re: JVC service or questions
  Nate
  - 27th Aug 2007 16:48
  Hi, thank you for your help in advance. Thanks
  
  
• Re: JVC service or questions
  Nate
  - 27th Aug 2007 16:49
  Hi, thank you for your help in advance. please contact me and I'll explain my problems. Thanks
  
  
• Re: JVC service or questions
  fiona
  - 27th Aug 2007 17:49
  My JVC DR-MH20S dvd & hdd video recorder is just under 2 years old (although I bought it in July 2005 I had to get it 'swapped out' within the first 3 months due to it sticking on 'loading'). For the past few weeks if I try and do basic recording (either pressing play record on remote or record on the machine) it goes straight to 'loading' and then shuts off. If I re-set pressing standby and stop simultaneously it stops doing it for a while then starts doing it again. Is there anything else I can do?
  
  
• Re: JVC service or questions Tyler - 28th Aug 2007 19:24
  Av-31bm3 JVC is my T.V. My T.V. has a line that goes through the center of the screen and thats the only thing that shows up. It sometimes fixes itself but it's probably just luck. I want to know how to keep it fixed. Thanks.