When I turned on my JVC (I'ART PRO) 52 inch wide screen TV I heard 2 clicks and now my picture looks like double vision. My warranty was up in April. Can you help with this?

I have a JVC digital video camera, model GR-D30 and receive a "Remove Lens Cap" message when turning it on even though the lens cap is off. I get no picture on the LCD, either. Can you give me any ideas as to the cause of this problem and the resolution? Thanks, Robert Bishop

Some how, my jvc camcorder (GZ-MG20U) does not transfer the video's audio to my computer either by usb cord or sd card..HEEEELP!

how do i tansfer my videos to my computer? what software and devices do i need?

hi, my jvc stereo model number MXGC5 stopped working last night.. it shut off and when i turned it back on, it stayed on for about 5 seconds then the screen displayed a message that said PROTECT, and it instantly shut off. at first i figured it may have overheated becuase i had music playing for quite a while at a high volume, but i went backt o try it this morning and it still gave the same message and shut off... i couldn't find anything in the manual about it either.. any ideas what the problem may be?

I have a JVC tv that someone gave me and while watching a show it just cuts off!!! ared timer light comes on and the menu will not allow you to change the sleep timer. It is a Av20f703. Please help :)

My wife brought me a JVC RV-NB1 boom box 2 years ago August on my birthday. I had to take my boombox to the repair shop twice due to replacing a/c fuse. Is there any way I can do this myself? and where about is the fuse box? What causes the fuse to blow out? I plugged it to the wall outlet and sometimes to the 600 watt inverter while camping.(The inverter is plug into the 12 volt d/c jump-start system.) Please respond and Thank You for your time.

I have a JVC GR-D30 Digital Video Camera (about 1.5 yrs old). It had been working fine until a few months ago. The LCD screen is on, but no video. When first turned on, a reminder to remove the lens cap flashes (no lens cap on). The reminder goes away but still no video on screen or in view finder. The date/time and everything else shows up. Playback of a previously recorded tape shows up fine on the screen, just no real-time video. Any help would be appreciated.

ok so i have a JVC RX-8000v audio/video control receiver. and it was vary good. but what i belive was one night with a power surge started it, but WHAT is happening right now is that when ever i try to switch it over to the 5.1 or just try to have both sets of speakers on (not left and right) but room 1 and room 2, the sound will play for 10 sec then it starts to crackle and and make a small pop as it drops out. then just stop, and no more sound, if u turn it up u can hear a little sound but then it overheats so ya. it sounds like its grounding out some were, but if i just have room one one its fine, or just room set 2 on its fine, but with both or 5.1 is when it gos crazy. not too happy, if u could help me out that would be sweet

I bought an older JVC at Goodwill. I don't have a book amd I know nothing about it. It works. The problem I have is I bought it to show my security camera. I need to be on line 2 and the camcorder has a line 1 and an F1. I could not find a line 2. Is there some other channel I can use that would equal line 2. I have it hooked to a television and it is hooked to dish and my television is playing thru it. It works fine. I can play a movie and view it on line 1 but my security cam wont show on it. I would really appreciate any help. Thank You. WILMA