Re: Error Codes Assistance

when i turn my panasonic nv-ds27 camcorder on it just says 'please reoperate after pushing reset button' or it says'to service. i've pushed reset button but nothing happens. Screen goes blank-please help me!!!!!!!!!!!!

Reply

• Re[2]: Error Codes Assistance
  Sathya
  - 15th Aug 2005 13:21
  I do have same problem. Can some one help me please.
  
  
• Re[2]: Error Codes Assistance faaiza sulaman - 15th Oct 2005 20:25
  i hve the same problem, please respond to my e-mail if you received a solution...thanks.
  
  
• Re[2]: Error Codes Assistance robert - 20th Dec 2005 13:26
  the same problem i have now too :(
  
  please e-mail me too when someone knows the answer.
  thanks
  
  robert
  
  
• Re[2]: Error Codes Assistance maciek - 9th Jan 2006 8:57
  Hi,
  Same problem, please help! After pressing button i have "service need" and again the same...
  
  
• Re[2]: Error Codes Assistance maciek - 9th Jan 2006 9:16
  Hi,
  I have the same problem, please help me!
  
  
  • Re[3]: Error Codes Assistance ram - 22nd Feb 2007 11:07
    hola, teniendo el mismo problema, lo solucione. desmontando la tapa del porta cinta, estaba floja, despues reset y listo
    
    
• Re[2]: Error Codes Assistance Clive Prothero - 12th Jun 2006 11:10
  Just had this problem and managed to fix it.
  
  I powered on WITHOUT a tape inserted. Display came up OK. Then inserted tape and all worked fine since.
  
  Don't know why, but it's fixed now. Maybe this will work in your case.
  
  
  • Re[3]: Error Codes Assistance
    Eve
    - 17th May 2007 23:21
    I just tried the power on without tape and it seems to work fine now, well at least it doesn't tell me to reset to operate, it just doesn't play back anything i may have taped!! So i don't know if it's recording or if it just needs chucking out!
    
    
• Re[2]: Error Codes Assistance meshack - 9th Apr 2007 7:34
  I HAVE PANASONIC NV-DS27, IT HAS ARESET ERROR BUT CAN'T TRACE THE RESET BATTON
  
  
• Re[2]: Error Codes Assistance
  ian west
  - 4th Aug 2007 12:29
  Try cooling your camera and tapes before use - I only get these errors when on holiday (i.e somewhere hot and sunny, not like the UK!), together with a red symbol of a tape with a line through it. I hold the camera in front of the car's Aircon blowers for a few minutes and it restarts fine! I assume therefore the fault message is due to overheating and condensation.