Re[3]: Error Codes Assistance

I have just had this error when trying to change tapes in my Sony DCR PC120E. The mechanism just seemed to jam. I searched google and found somebody else who had the same problem. The answer is simple. Just remove your battery and then reinsert it. This resets the camera and allows it to work again!

This advice has just helped me and my camera is working agin now!!!

Good luck!

Reply

• Re[4]: Error Codes Assistance
  hris
  - 21st Nov 2005 15:52
  i had a similar problem with my camera, and followed this advice, and it now works!! cheers!
  
  
  • Re[5]: Error Codes Assistance
    chungg
    - 4th Feb 2006 23:01
    I have similar problem i.e.unable to eject or run the tape with error code C:32:30 on my SONY DCRTRV20E. Have tried keeping it in warm dry room / charged up / tapping the sides and base to no avail. Only when I read this Raja's advise to remove the battery (I also had discharged it first by leaving it on- don't know whether it did make the difference!)that I found the camcorder worked agains as soon as I had re-inserted the battery. Thank you! can anybody advise whether this will now work every time or my camcorder will eventually die?
    
    
• Re[4]: Error Codes Assistance Deb McClorey - 8th Jan 2006 19:37
  I have tried removing the battery several times on our camera and waited 30 seconds and it doesn't reset itself. Any other suggestions?