| PECHORIN'S home account archive eshop globalmediapro |
|
|
|
|
|
|
Home | Previous messageRe: Webcam appears dark and no part of me is visible.jack handy Posted Jan 12, 2006, in response to:Braedan Wardyour web cam is a no lux cam. meaning needs light to operate. Most web cams needs lots of bright light to work properly. If you use it at night or in a low lit room (even if u have 1 bright overhead light lit) it will not work or appear dark. There are usually settings on the cam software to enhance the picture during low light times but that only goes so far and although it does help alot it will not solve the problem when the light is untimately too low. Best advice is to go out and buy a semi professional security cam for quick frame counts, good picture in low light and larger clearer images.
1 comment
If the device can not be found make sure that the service that runs the cam in windows (lcoms or lvcoms) is running in your task manager. Otherwise you will have to use the cam software to take a picture. If that does not work check your device manager to make sure the cam is installed properly and that it is fuly functional. if that is ok then unisntal the samera from the device manager, restart, reisntal lteh cam and restart again and see if that takes care of the problem. bad drivers can cause lots of prblems. |
|
|
