PECHORIN'S home   account   archive   eshop   globalmediapro
.
.


Post new message


Home | Previous message

Re: Convergence problems on AV-48WP30

TRACY Posted Aug 22, 2006, in response to:Mark Venable

This guide has been done for about 2 weeks. If the guide has worked for you please post some feedback for the others. Thanks.

Reply

Share |
4 comments

    My AV-48WP30 has suddenly developed a green convergence problem. I have taken the front off of the TV and inspected the convergence board and everything is tight. I see many people are just replacing a chip or two to fix the problem. Can someone help me with the schematic and what to look for? Thank you in advance.

    Reply

    I'm having similar problems. I can't get the convergence set across the top or bottom the only ones that will line up are across the middle. The picture seems to bow from the top and bottom toward the middle causing double and triple images. Can you please send me the DIY guide also. Thanks in advance for the help.

    Comment 1, Last comment by Josh May 27, 2007

    Hi TraccyI'm haveing trouble with mostly green it is way over to the right side when I try to adj. with the remote the lines are all wavey the blue and red will not alline any where close to the green could this be the problem with the chip's also.I would apriciate any info on where to get the chip's and how to reolace them.I have moderate electical experiance.Thank's for your help Dan.

    Reply

    Can you send me the DIY guide for the convergence problem? Thanks

    Reply




  


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed