Re[2]: Convergence problems on AV-48WP30

Board is toast. Anyone know where I can buy the SSB-5051A-M2 board? Partstore advertises it but doesn't have it in stock. JVC hasn't answered my question from 11/16/06.

Reply

• Re[3]: Convergence problems on AV-48WP30 John - 31st Dec 2006 23:00
  Did you find a place to buy the SSB-5051A-M2 ? I think I need to buy this for my TV (the entire circuit board cracked). Does this come with the IC installed, or is it just the board? Would I need to buy anything else, or just install it?
  
  thanks JOHN
  
  
  • Re[4]: Convergence problems on AV-48WP30
    Pat
    - 1st Jan 2007 19:18
    Mine cracked also. JVC won't sell it to me direct but if you can find a service center to order it for you, it is $267.00. I think I found someone to order it for me so if I do get it, I will let you know if it works.
    
    
    • Re[5]: Convergence problems on AV-48WP30 John - 1st Jan 2007 20:24
      So does the board come fully assmbled? Does it already have the IC chips and bundled cord to the Covergence OSD? I just want to do as little as soldering as possible, and for $300 bucks I'm hoping I can just clip it in!! thanks for your help, JOHN
      
        See 2 more comments...
      
      
  • Re[4]: Convergence problems on AV-48WP30 rock - 18th Aug 2007 4:28
    I had a problem with my TV colors not lining up. One day I turned it on and the green was out of wack. I checked this message board and replaced the STK chips, bad soldering and all led to me just giving up on that and buying a whole new Convergence Board ($185). I replaced the missing silver box on the new board and I just plugged this in and though now my Green lines up okay, my red is out of whack. Is there something I am doing wrong? Can anyone help me? Did i miss a step? Frustrated......Bruce
    
    
    • Re[5]: Convergence problems on AV-48WP30 john - 20th Aug 2007 22:53
      Did you try to manual convergence on the menu? By using your remote and number pad and select button, you can manually adjust the convergence lines.
      
        See 1 more comment...
      
      
• Re[3]: Convergence problems on AV-48WP30 rock - 18th Aug 2007 4:27
  www.partstore.com or e-bay
  
  I had a problem with my TV colors not lining up. One day I turned it on and the green was out of wack. I checked this message board and replaced the STK chips, bad soldering and all led to me just giving up on that and buying a whole new Convergence Board ($185). I replaced the missing silver box on the new board and I just plugged this in and though now my Green lines up okay, my red is out of whack. Is there something I am doing wrong?
  Can anyone help me? Did i miss a step? Frustrated......Bruce
  
  
  • Re[4]: Convergence problems on AV-48WP30 jam - 26th Jan 2008 0:47
    where did you find the convergence board for $185?