Re: Convergence problems on AV-48WP30

Hi Eric, I'm having the same convergence issue with my JVC AV-48WP30. The R842 resistor is obviously blown. Could you send me a copy of the schematics, I can't tell what type of resistor this is. Thanks! -Chris

Reply

• Re[2]: Convergence problems on AV-48WP30 Otis PB - 9th Feb 2007 9:10
  It is a 2.2 Ohm 1 Watt resistor at 5% Varience. Look for 2 red bands followed by 2 gold ones on the replacement. I had a little bit of trouble finding one in Louisville. I finally got one at a place called "Master Distributors" for about 60 cents. I replaced mine with a 2 Watt resistor to hopefully prevent a future burnout.
  
  
  • Re[3]: Convergence problems on AV-48WP30 r - 18th Aug 2007 4:21
    I had a problem with my TV colors not lining up. One day I turned it on and the green was out of wack. I checked this message board and replaced the STK chips, bad soldering and all led to me just giving up on that and buying a whole new Convergence Board ($185). I replaced the missing silver box on the new board and I just plugged this in and though now my Green lines up okay, my red is out of whack. Is there something I am doing wrong? Can anyone help me? Did i miss a step? Frustrated......Bruce