PECHORIN'S home   account   archive   eshop   globalmediapro

Post new message

Home | First message in thread | Previous message

Re[4]: Convergence problem with JVC AV-48WP74 tv

Alan Posted Jul 11, 2007, in response to:Gonzo

In my case, I had a bad soldering joint in the convergence board. To test it, disconnect all the connections to the convergence board, and power on the set. If the problem is in that board, it should power up, with a wavy picture with little to no convergence. If the problem is elsewhere, It will still thump. Thats about all I did.


Share |


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed