Error Codes Assistance

Assistance for Error Codes

If anyone is having any kind of Error code, clean head icon or any other concern, contact me first before assuming you have a problem. My e-mail is Ssample@jvc.com.

I am knowledgeable and have helped many people past their error codes without service. Several things can cause error codes and I would be more than happy to assist you in determining if you do indeed have a problem and what options you have available.

Please refer to this site if you contact me. Thank you.

Stacy Sample
Service Coordinator
Houston, Texas

Reply

• Re: Error Codes Assistance stephen - 10th Apr 2006 10:10
  hi i have a sony camcord ccdtrv68 and i have a error code of C3110 help me get rid of this so i can use my camcord again. my email is fireofgodcoming1@juno.com
  
  
• Re: Error Codes Assistance
  Dennis Horswell
  - 10th Apr 2006 16:49
  Please can you help me, i have a kodak ls443 camera which is showing an error code e45. the lens is staying out and the screen is all blue showing the message.when i switch the camera off the lena stays out, does not retract.
  any ideas?
  many thanks.
  
  
  • Re[2]: Error Codes Assistance
    dante20
    - 14th Apr 2006 18:30
    trying pushing in the lens/zoom located on the front of the camera. i did it and heard a slight snap. i turned the camera back on and the error disappered! good luck because Kodak is useless!
    
    
  • Re[2]: Error Codes Assistance
    rita
    - 19th Apr 2006 0:54
    Re the E45 error .... my kodak camera showed the same. Didn't have the time or patience to send it back to kodak so ... undid 3 long screws from side and 4 short ones from base - prised apart carefully and cleaned the circular metal bit which is underneath selection dial. Put camera back together again and after re-setting the date and time, it all works perfectly. Kodak are ripping us off if they make us send back camera's for expensive repair when all it needs is a clean contact with the switch... something our local camera shop could do on the spot
    
    
    • Re[3]: Error Codes Assistance
      Julian
      - 26th May 2006 1:10
      My Kodak LS443 keeps getting a blue screen with an #e45 error when I turn it on. Any Ideas for this problem?
      
        See 1 more comment...
      
      
  • Re[2]: Error Codes Assistance herbert helton - 10th Jul 2006 15:31
    i get an error 25 code on my digital camera. could you tell me what it is and how to remedy it.
    
    
    • Re[3]: Error Codes Assistance glen - 18th Oct 2006 19:33
      i tried to do what the first person suggested but didnt work this is the second time it has broke, its junk
      
      
  • Error Codes Assistance E45 Bill - 31st Dec 2006 19:34
    This camera is junk. I have already paid $200 to replace the lens. It works for only six months and it has broken again. No more Kodak, I prefer to buy Sony or Canon next time.
    
    
  • Re[2]: Error Codes Assistance
    Vishwnath
    - 6th Jul 2007 7:19
    facind below error in kodam v530 camera. Let me know solution without part replace. Regards Vishwnath
    
    
• Re: Error Codes Assistance Fanie du Plessis - 11th Apr 2006 6:25
  Hi. I am getting the C13:70 error code when trying to play a DVD-R's on my Sony DVD player. It plays +R's with a skip here and there
  
  
• Re: Error Codes Assistance John Latour - 11th Apr 2006 10:38
  Hi Stacy,
  My error code is sc541 for a Ricoh AP3800C. Any ideas?
  Thanks
  John.
  
  
  • Re[2]: Error Codes Assistance chris - 10th Jul 2006 17:54
    the fuser unit is not warming up! could be a fuse.
    
    
    • Re[3]: Error Codes Assistance
      sandy
      - 18th May 2007 5:59
      Hi , I see you from google search, I have not good for Eng Language, But I have problem about Ricoh AP3800C, it show error code "SC471" , Can you help me? what about problem? Can you answer my E-mail? Thank you very much
      
        See 1 more comment...
      
      
• Re: Error Codes Assistance Sue FInley - 11th Apr 2006 17:34
  I have a Sony Smart Zoom Disc P52 camera which is showing a E:61:10 code on the screen. Any suggestions? I found by googling that some people with the 61:00 code have slammed their camera and that fixed it, but I am not sure that 61:10 is the same. Any help appreciated. Thanks, Sue
  
  
• Re: Error Codes Assistance HUGH - 11th Apr 2006 19:30
  HI DONT KNOW IF IT IS AN ERROR MESSAGE OR WHAT. BUT I CANNOT GET A TAPE INTO MY HANDYCAM CCD-TR511E ... SMALL ARROW FLASHES IN CENTRE OF SCREEN AND THE NUMBER C32.30 SITS TOP RIGHT... TRYED EVERYTHING DOH PLZZ HELP ME CHEERS
  
  
• Re: Error Codes Assistance Paul - 11th Apr 2006 21:19
  I have a JVC GR-AXM225 that I am unable to use. Every time I turn it on, it has a EO1 message that says it is in safe mode. Please help.
  
  Paul
  
  
• Re: Error Codes Assistance Cody Schexnayder - 12th Apr 2006 2:06
  i have a Panasonic Model CQ-C7103U car stereo. A cd will play for about 11 seconds and the an error code shows up on the screen cd E1. Any help would be appreciated.
  
  Thanks,
  
  cody
  
  
  • Re[2]: Error Codes Assistance eric - 22nd May 2006 2:33
    i only get that code if i put in a scratched up cd or a dvd
    
    
• Re: Error Codes Assistance
  alonzo taylor
  - 13th Apr 2006 19:17
  i have an infiniti g35 and the 6 disc cd player will not eject cd's it gives me a error code " cd err fo " could you tell me if i can remove discs from this code stand point or do i have to pay the 460 dollars to have them removed?
  
  
  • Re[2]: Error Codes Assistance cereal2k - 3rd May 2006 4:20
    I had the same problem and found this thread at the link below. I'm yet to try it but hopefullu I'll be successfull without having to get it replaced. http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB25&Number=67378364&page=0&view=collapsed&sb=5&o=&fpart=1
    
    
• Re: Error Codes Assistance
  Janelle
  - 14th Apr 2006 0:38
  Hi, I recently bought a 2005 Pontiac Grand Am and my factory CD player suddenly stopped working. It was playing fine, then when I went to change the track it wouldn't play. It tried to catch for a second then it flashed "err" and started to play the radio. Hope you can help!