PECHORIN'S home   account   archive   eshop   globalmediapro

Post new message


JVC service or questions

Stacy Sample Posted Jan 31, 2004

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better. Stacy Sample JVC Service & Engineering Houston, Texas


Share |
6,445 comments, pages:   « 1 2 3 461 462 463 464 465 466 467 643 644 645 »

    Re: JVC service or questions

     David Posted Oct 18, 2005

    I have a JVC GR-D22. Everytime I turn on the camcorder it gives me "E04 eject and reinsert tape/unit in safeguard mode". However I was not even able to unload the tape. I detached the battery and put it back on, but nothing happened. I can not unload the tape. Please help me with this? Thanks a lot.


    Re: JVC service or questions

     Stacy d Posted Sep 28, 2005

    Stacey, can you advise on a "lens cap " error message on JVC GR-D20 camcorder approx 24 months old. error message goes away after about 5 flashes or so, then it just has a black screen. Play back works fine, only black when in record mode. Record sound fine, but no image. Please help.

    Comment 1, Last comment by Metuusala Oct 17, 2005

    I have a KD-G200 JVC car stereo and I have lost the manual. Can I download one? I really only need to know how to set the clock, I've tried everything and it is driving me CRAZY!!! Please help.

    Comments 2, Last comment by T.J. Oct 17, 2005

    i have a grd90u.Recently i replaced the lcd screen due to being cracked.Lately the unit has been coming up condensation operation paused.Ive been using it for a couple of years with the cracked screen with no problem.Could it be something i did when installing lcd or is there something i could do to fix this problem?Thank you


    I have an GR-AXM230 that is a few years old now. My problem is similar to everyone elses. When I switch my camcorder on, I get the E03 "Unit in Safeguard Mode". It comes up instantly every time I switch it on. I, however, do not have a problem with the tape ejecting. That part works fine. Can you help?? Thanks Greg


    Hi Stacy, I have a JVC mini dv camcorder model# GR-D90US. Everything works, but I do not receive a picture(view-finder nor LCD windows). When I switch to the modes, Manual/Auto, it says lens cap is on when there's no cap on the lens. What's your opinion?


    I am selling on EBAY a JVC Digital Camcorder that needs repair. It is still under warranty for parts, but not labor. I thought you might be interested in this item. It is item number 7554722107 on EBAY. Thanks, Bob Hitt


    I have got a moving entertainment device of jcv EXAD KD-AV 7001.(brought from middle east- six months ago) Its strip (ribbon type wires) connecting to the control panel got damaged and the device cannot be used now. Please let me know where I can get a spare strip / service centre in India. Looking forward to your help


    I have a JVC GR-D30U camcorder showing the E04 error code. The tape will not eject. Even if I disconnect it from it's power source for 30 mins and then try to eject it will not. What can I do?


    I have a GR-D90U and it was working untill I plugged it into a universal power supply. The camcorder uses 11v and once i plugged it into the power supply (dumb idea, it did seem dumb at the moment) it went dead and now will not come on. When I tested the power supply with a volt meter it was putting out 15v no matter what the setting was. Was wanting to know if they have a fuse or something to keep it from frying the board. any help would be great. just dont tell me that I am stuppid I already know that.

    Comments 2, Last comment by Joe Rara Oct 15, 2005
Pages:   « 1 2 3 461 462 463 464 465 466 467 643 644 645 »


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed