JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Rick Dixon - 27th Oct 2007 16:20
  I recently sent in my JVC GR-D72U Mini DV Camcorder for an Error Repair and got it back quickly! However now I get a message "Eject tape and reinsert-Safeguard Mode". It will not allow me to record anything.
  Any help?
  
  
• Re: JVC service or questions Dennis Pielack - 27th Oct 2007 21:36
  My mother-in-law has a JVC DVD/VIDEO CD/CD Model NO. HR-XVC26U that blew a fuse: 1.25 A 250V. Can you sell me one or tell me where to get one. I live north of Detroit. Thanks
  
  
• Re: JVC service or questions Derek Cook - 28th Oct 2007 2:01
  I have a JVC GR-DX97U I Just got it back from the service department who replaced the ccd chip I believe. It had been giving me the lens cap error. Anyway I just got it back and tried to use it and it's saying that it is in safe mode and that I need to eject the tape and reinsert. I have done this and nothing has changed. the error is E03. Please help asap. If I can get it out of safe mode without having to send it in again that would be great.
  
  Derek Cook
  
  
• Re: JVC service or questions Millicent Hollingsworth - 28th Oct 2007 4:06
  I have a JVC GR-D70U, it is now recording blurry and I cannnot dowload my videos to my pc, can anyone help me with either problem. Best buy just attempted to get me to buy a Sony hard drive camcorder when I spent like $899 on this one from them a few years back.
  
  
  • Re[2]: JVC service or questions Ryan Jenkins - 8th Dec 2007 13:25
    I have had the same problem with mine. Did you ever get any answers?
    
    
• Re: JVC service or questions Bryan Sullivan - 28th Oct 2007 16:26
  I have a 32" JVC tv model # AV-32f702...I have a few thin white lines at the very top of my set and a series of dashes below it. I have been scouring the net for help on this and read where someone had a 27" jvc not the same model as mine not even the same size but that he replaced the c424 capacitor and it fixed his problem which was identical to mine. I purchased the cap tried to find it on my board...not there, it would stand to reason that my tv is different than that guys and thus the boards are different. It seems that my problem is an easy fix if I just knew which cap tp change. I have the parts list and all necessary tools, I just need to know which cap to buy. I would be forever grateful for your assistance, I really dont want to blow over a G yet on a plasma...I'd like to get another year out of my set, I really like it, but the lines at the top are starting to bother me as I seem to fixate on it.
  
  THANKS in advance!
  
  
• Re: JVC service or questions Derek Cook - 28th Oct 2007 22:03
  JVC GR-DX97U I just got my camera back from the jvc service for the lens cap issue (ccd chip). I turned it on put in the tape and it says that it is in safe mode (E03) and to eject the tape and reinsert it. I have done this several times and it does not fix the problem. Any suggestions?
  
  Derek Cook
  
  
• Re: JVC service or questions
  adit
  - 29th Oct 2007 0:41
  Dear Stacey,
  
  Im having problem in finding driver for my JVC DV camera model number GR-D%)AS. Can u help me with it? Thnx for the cooperation...
  
  Regards,
  Adit
  
  
• Re: JVC service or questions zuhairi majid - 29th Oct 2007 6:11
  I got "SAFEGUARD MODE" on my JVC camcoder GR-DVL310A . What todo
  Thanks a lot.
  
  
• Re: JVC service or questions
  Janet Channing
  - 29th Oct 2007 17:11
  Hello,
  
  I bought my camcorder model #GRD-32U approximately 2 years ago & have used it about 6 or 7 times. Last week, when I attempted to record something -- through both the monitor & the lens finder the only thing I could see were vertical coloured lines (blue, brown, yellow). From what I understand, through research on the internet, this is due to a faulty CCD being installed in the camera at the manufacturing plant & that JVC will repair this at no cost to the consumer.
  
  Who would I contact in regards to this?
  
  Thank you, Janet
  
  
• Re: JVC service or questions enrique lara - 29th Oct 2007 17:52
  I have a cam-corder model GR-DVL725U that will not work at all. The battery is ok, it reads 7.8VDC. I have the charger APV12U that puts out 11VDC. The camera does not come alive, nothing. It will not eject the tape either. Can you help?
  For your attention, I remain, very truly yours
  enrique