SONY ORIGINAL PARTS

SONY DIGITAL AND ANALOG REPAIR HELP AND PARTS

I AM AN AUTHORIZED SONY CENTER CAMCORDER TECHNICIAN WANTING TO HELP OTHER TECHS IN REPAIRING CAMERAS.ALSO WILL HELP OTHERS FIND - RESEARCH PART NUMBERS- OR ORDER SONY PARTS FOR OTHERS.

Reply

• Re: SONY ORIGINAL PARTS CLINT - 2nd Feb 2005 14:11
  i AM LOOKING FOR THE DRIVER FOR A PANASONIC PV-L452D
  
  
  • Re[2]: SONY ORIGINAL PARTS Zoot - 7th Apr 2005 19:06
    Did you ever find them? I need them too and would appreciate your help :)
    
    
• Re: SONY ORIGINAL PARTS CHARLES CLARK - 2nd Feb 2005 15:18
  HELLO
  I HAVE A DCR-TRV140E CAMCORDER. THE UNIT IS DEAD, IF I FOUND A FUSE BLOWN (F002) I HAVE JUST ORDER 5 MIRCO FUSES. WHAT COULD HAVE BLOWN THIS FUSE. THIS SUPPLY VOLTAGE TO THE DC/DC CONVERTER IC. THIS IS ALSO THE( VTR UNREG.VOLTAGE)THIS VOLTAGE ALSO GOES TO OTHER PART OF THIS CAMCORDER. PLEASE HELP ME IN MAKING A GOOD REPAIR. THANKS CHARLES
  
  
• Re: SONY ORIGINAL PARTS JOEY R. - 2nd Feb 2005 19:12
  I AM LOOKING FOR A SONY CONNECTION BOX FOR SONY XAV-7W.
  THE MODEL NUMBER IS XA-114. PLEASE CALL ME OR E/MAIL ME ASAP
  
  THANKING YOU IN ADVANCE
  
  JOEY R.
  1718 272-7228
  
  
• Re: SONY ORIGINAL PARTS JOEY R. - 2nd Feb 2005 19:26
  I NEED A SONY CONNECTOR XV-114 FOR THE SONY XVA-7W.PLEASE CALL ME ASAP
  THANK YOU
  JOEY R.
  1718-272-7228
  
  
• Re: SONY ORIGINAL PARTS Peter Tran - 2nd Feb 2005 21:28
  Hello Dear,
  
  Please help to find the part number for SONY model: KPR-53EX20
  
  IC: CXA1012AS, CXA1124AS and STK4412
  
  Thank you for help
  
  Peter Tran
  email: petertran202@yahoo.com
  
  
• Re: SONY ORIGINAL PARTS
  Nick Good
  - 2nd Feb 2005 22:47
  looking for Motherboard for Sony HCD S800 DVD player
  
  
  • Re[2]: SONY ORIGINAL PARTS Stewart - 9th Feb 2007 17:38
    Did you ever find a mother board for you Sony HCD-S800? I think I also need the same part, what were your symptoms? I am unable to read CD's or DVD with the message no disk, I also have a very fuzzy splash screen (The main screen has many lines almost like it is outputting NTSC rather than PAL. I am suspecting the main boards as I have already replaced the laser. If you did find one could you let me know where I could get hold of one? Many thanks, Stewart
    
    
• Re: SONY ORIGINAL PARTS Eli - 5th Feb 2005 23:12
  im trying to trouble shoot a Sony STR-K740P, it keeps blowing fuses, any help or direction would be great! Thank You!!
  ELi
  
  
  • Re[2]: SONY ORIGINAL PARTS Elliott - 2nd Jun 2005 16:45
    I have repaired a different model Sony doing the same thing. The thing I love about alot of Sony units is, they use individual transistors for the "finals", or last stage of ampllification (as opposed to steak-packs, one big hybrid chip). I havent seen inside your model yet, as I havent opened my 740P yet, but here is one thing I would check for if you havent already. With a ohmmeter or digital multimeter with diode check, look for shorts across any of the high-power transistors (these are usually mounted on the aluminum heat sink in pairs, (1) positive channel and (1) negative channel). The ones in mine had a number like SK brand MN2488 ( the negative) and MP1620 (the positive) which were both shorted. (try combinations of all 3 pins) There were several pairs of these, and unfortunately required me removing an upper set to get access to the lower set, soldered to the main board. I cant remember the exact resistance values for the "good ones", but the "bad ones" were @0 ohms, regardless of the probe polarity. I desoldered them and retested them out-of-circuit to verify the short. I found replacements through MCM (www.mcminone.com)for less than $20 total. This included new fuses as well, AFTER the transistors were replaced. Hope that helps!!!!!! Elliott
    
    
    • Re[3]: SONY ORIGINAL PARTS Eli - 2nd Jun 2005 18:22
      thank you very much, that helps alot.... ive asked some questions outher place and no one would tell me how to test.. so thank you!
      
        See 1 more comment...
      
      
• Re: SONY ORIGINAL PARTS
  Charles Rogers
  - 7th Feb 2005 23:32
  Hello, I hope you are still doing this. If so I would like to buy a part for a dcr trv11. the number that is on the back is f1382 and or 3-060-113- it is the plastic part that goes over the lens and IR. I do not need the electronics for it.
  
  Thank you for your time!
  
  Charles
  
  
• Re: SONY ORIGINAL PARTS Nicolas - 8th Feb 2005 20:43
  Hi,
  i need the DCR-TRV17 mainboard, can you get it?
  
  Thanks
  
  Nicolas.
  
  
• Re: SONY ORIGINAL PARTS R Stoky - 14th Feb 2005 6:32
  I'm looking for a lens cap for the lens hood for a Sony DCR-VX2000. Also, is this lens hood cap the same size as the vx1000?
  I'm also looking for an eye cup for the vx2000. Again, will an eye cup from a vx1000 fit on a vx2000 eye peice?