SONY ORIGINAL PARTS

SONY DIGITAL AND ANALOG REPAIR HELP AND PARTS

I AM AN AUTHORIZED SONY CENTER CAMCORDER TECHNICIAN WANTING TO HELP OTHER TECHS IN REPAIRING CAMERAS.ALSO WILL HELP OTHERS FIND - RESEARCH PART NUMBERS- OR ORDER SONY PARTS FOR OTHERS.

Reply

• Re: SONY ORIGINAL PARTS
  Antonio Adamis
  - 1st Mar 2005 17:47
  I'm need a replacement MPEG board for a Sony DA SA30 home cinema system.
  
  Is it possible for you to provide me with the part number or perhaps even a replacement board?
  
  Thanks
  Antonio.
  
  
• Re: SONY ORIGINAL PARTS Dave K - 4th Mar 2005 18:41
  Hello
  
  I'm looking for a good used record & mode switch assembly for a Sony TRV-308
  Handycam. The red "button" broke off of mine; I can thumb the mode switch to "Play" or "Record" easily, but I have to poke the hole with a pen to start or stop the recording sessions, which is a major pain.
  I called Sony, and they want over $60 for a new one, so I'd like to find a good used one at a more reasonable price.
  I'd appreciate any help, thanks.
  
  
  • Re[2]: SONY ORIGINAL PARTS Myron - 15th Aug 2006 14:59
    I empathize with you. The Sony Handycam switches are made of cheap plastic. In 1997, my Handycam Model CCDTRV30, switch broke-off. I was on a trip at the time to Las Vegas. I purposely bought the camcorder for the trip. This incident ruined my trip. I never thought about moving the switch manually. I would pay the $60 for a new part if I were you as the camera is pretty good. I own the CCD-TRV308 and it worked perfectly since 2002 until recently. Suddenly the autofocus goes out of sync for no reason. It is ruining my taping. It happens only intermittently with no warning. I hate the new Sony's; many of them have "Touch-Screen" controls which means that you must use the LCD screen at all times!
    
    
• Re: SONY ORIGINAL PARTS
  al
  - 4th Mar 2005 21:53
  Hi. I'm looking for a Lens Hood for the Sony VX1000 Video Camera, Please let me know if you can help me or perhaps know where I can get one. Thank you!
  -AL
  
  
• Re: SONY ORIGINAL PARTS Bill - 5th Mar 2005 0:55
  I have a Sony DA80ES receiver that is flashing "Protector". In troubleshooting (without a manual), I managed to mangle the short rigid ribbon cable that connects the digital and RF boards.
  
  1. Where can I get a service manual for this, and
  2. How can I get that particular part once I have the part number?
  
  Any help would be appreciated. Thanks
  
  
• Re: SONY ORIGINAL PARTS Joe - 5th Mar 2005 15:20
  I am looking for a replacement lcd screen for Sony trv20
  
  cost please...
  
  
• Re: SONY ORIGINAL PARTS
  norman j ingram
  - 5th Mar 2005 23:44
  I wish to purchase a remote commander for a Sony tv modelKV_X2533S.Hope you can help Regards Norm I
  
  
• Re: SONY ORIGINAL PARTS Pat Hummel - 7th Mar 2005 8:15
  Hi, I am trying to find a new video head for a VX3. I could several other
  parts ,but, lets start with the biggie. My phone # is (512) 266-8265
  Thanks for your time, Pat Hummel
  
  
• Re: SONY ORIGINAL PARTS
  Star
  - 9th Mar 2005 19:17
  I have a Sondy CCD F-70 handy cam and the lens is cracked, do you have replacment for it
  
  
• Re: SONY ORIGINAL PARTS FRANK A FERRO - 13th Mar 2005 17:35
  HI I AM LOOKING FOR A SONY REEL TO REEL TAPE RECORDER MOTOR. IT IS A 100V 50/1.5 UF NO. 1GXOV MOTOR IC-624H1 HOPEFULLY SOMEONE CAN HELP ME GET THIS MOTOR. THANK YOU FRANK FERRO
  
  
  • Re[2]: SONY ORIGINAL PARTS David Persaud - 27th Mar 2005 22:23
    I have 3 sony moters in excellent condition model number IC-624H1, 100V 50/60 Hz 2.2/1.5 uF????? What are you willing to paid for them?? Email me David P
    
    
    • Re[3]: SONY ORIGINAL PARTS Howard Daniel Rollins III - 7th Dec 2005 20:44
      If you still have any of those 100v 50/60hz 2.0/1.5uf No. 1gxcy or ov motor IC-624h1 for sale please let me know. I could use one for my sony TC-355 Reel to Reel Tapecorder. How much would you sell one to me for? I shall await your return e-mail. Thanks for your assistance. Sincerely, Howard
      
        See 1 more comment...
      
      
• Re: SONY ORIGINAL PARTS Ric - 14th Mar 2005 21:13
  i have a Sony DVP-NC600 5-Disc Carousel Changer the motor that spins the dvd has stopped spinning.
  
  can i replace just that motor or will i have to replace the whole lens assembly?
  
  PNs
  
  khm-2
  
  40aaa
  20z13ca
  222471
  
  thank you
  
  
  • Re[2]: SONY ORIGINAL PARTS
    Eric Hibbs
    - 26th Mar 2005 17:59
    I have the same player and just started having the same issue. I have had pretty good luck with Sony's products in the past. I have not yet found the motor alone. if I do, I will let you know.
    
    
  • Re[2]: SONY ORIGINAL PARTS john howard - 11th Apr 2005 16:38
    I just came across the same problem with my DVP-NC600. It showed error code E:27 00. When I took it apart to find the problem, it's only the drive belt that broke. I'm currently looking for a new drive belt.
    
    
    • Re[3]: SONY ORIGINAL PARTS Marshall DeNys - 6th Apr 2008 1:17
      I have the E2700 code, but haven't taken it apart yet. Is it worth repairing?
      
      
  • Re[2]: SONY ORIGINAL PARTS
    Eric Hibbs
    - 17th Apr 2005 16:56
    I replaced the whole laser pickup. I found it for a pretty good price here: http://www.electronix.com/catalog/advanced_search_result.php?ELECTRONIX_CATALOG_SESSID=9f73bd21c5b7559d9610bff9df261fc3&keywords=khm-240aaa&x=0&y=0 Now it spins just fine. The only problem is that I think I damaged the gold colored ribbon cable so after a few seconds I get an error saying that there is no disk. I can't find a part number on the damaged cable. Some luck.
    
    
    • Re[3]: SONY ORIGINAL PARTS
      Michelle Bokmeyer
      - 7th May 2005 20:58
      Eric, I initially had the "no disk" error: make sure the top (white) plastic is also spinning...usually a light touch will realign it. I had the "no disk" problem first, NOW the disks have stopped spinning entirely, and I'm looking for a replacement drive. Thanks for the link!
      
      
    • Re[3]: SONY ORIGINAL PARTS
      michelle bokmeyer
      - 7th Jun 2005 16:10
      Eric, OK, my last reply was ignorant. There is a solder short on the top side of the circuit board that needs to be removed. Remove it and the DVD player will stop saying 'no disc'.
      
      
    • Re[3]: SONY ORIGINAL PARTS Sparky - 25th Jan 2006 1:49
      I purchased the replacement part for the Sony CD/DVD Player, somehow I was still getting a Insert Disk Error, I compared the two part replacements and find out that the Spin Motor was the correct part, but the laser beam module was not. Since my DVD Laser was still operational, I swapped out the spin motor only. I got it to work perfectly.