JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions paul Turner - 28th Jan 2005 14:30
  I have jvc gr-d70ek serial no 15831887 which has been stored since september it will not charge or run at all even with power adapter connected.I have tried 2 different batteries any help please
  
  
  • Re[2]: JVC service or questions
    kaz taylor
    - 21st Mar 2006 18:59
    i have the same problem, tell me did you ever fix it? if so how??
    
    
• Re: JVC service or questions
  FRED BLANCHARD
  - 28th Jan 2005 15:05
  I have had a jvc video recorder for a number of years and recently bought a new computer. I have taken the Picture Navigator software that originally came with the recorder and have installed it. The main menu appears on my monitor and I have installed the correct computer cable. When I try to read the recorders still photos that have been on it for years, the screen tells me it cannot read the recorder. I have tried changing the com port setting through the options menu of the Picture Navigator software, but I cannot get the software to read the picture images. The booklet that came with the recorder does not have a trouble shooting section that covers this problem. Do you have any ideas of things for me to try or is the software to old to run with window 2000XP? Any assistance will be appreciated.
  
  
• Re: JVC service or questions
  PPM
  - 28th Jan 2005 16:23
  'EO1 UNIT IN SAFEGUARD MODE' is on screen on a JVC GR-DVL150E Mini-DV digital camcorder. What can the problem be please ? The tape cassette door does not open.
  Thanks.
  
  
• Re: JVC service or questions mark flemming - 28th Jan 2005 17:33
  How do I remove the KD-G200 from the dashboard....not the faceplate, but the unit itself. I need t have warrenty work done on it and must remove it myself.
  
  thank you
  
  
• Re: JVC service or questions Larry M Wilson - 29th Jan 2005 1:58
  Hello;I have a JVC AV27020 tv and while watching it it went out the red LED in front flashes when pluged in after about 5 sec, I opened it up and found a 1.25A fuse under a couple of wire wound resistors had blown, After replacing the fuse still have the same result with the TV.
  Any help would be appriciated
  Thanks ;Larry
  
  
  • Re[2]: JVC service or questions Bruce - 24th Dec 2006 22:21
    My TV has the same problem - did you ever find out what the problem was?
    
    
• Re: JVC service or questions joan - 29th Jan 2005 3:27
  the tape in my cam corder will not go down
  
  
• Re: JVC service or questions JOSEPH TROSCLAIR - 29th Jan 2005 4:04
  i need to find a owners manual for a JVC KD-LX111 i can't figure out how to wire it cause it has a illumination wire and i don't know how to wire it properly or i'm just not sure so please write back ASAP.. Thanks: JOE
  
  
  • Re[2]: JVC service or questions Craig Meeks - 4th Sep 2005 3:32
    How do you set the clock on the JVC KD-LX111?
    
    
• Re: JVC service or questions Wilson Camacho - 29th Jan 2005 4:23
  when I press the record button, I get EO3 remove and reattach battery on the display. when I open to remove the tape. it is jamed inside. I own the JVC VHSC GR-AXM225
  
  
• Re: JVC service or questions Kevin Walter - 29th Jan 2005 4:46
  We have a JVC GR-SXM527 camcorder, and the zoom button (actually a wheel) has broken. I have the camera apart, and can replace the wheel, etc if I can get the necessary parts. I'm having no luck on the internet. Is there a place where I can get what I need (replacement parts from INSIDE the camera).
  
  
• Re: JVC service or questions Glenn Little - 29th Jan 2005 5:16
  I have a GR-D90U that has worked well until recently. First it had a dew warning come on and took an hour or so to clear. Now the camera will not power up. When I turn the camera on the POWER/CHARGE led comes on. The camera will not display an image either in the viewfinder or the LCD display. It will not unload the tape from the camera. Any suggestions?? Where can I get a service manual for this camera?
  
  Thank you
  Glenn Little
  WB4UIV