JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions
  Brian
  - 30th Jan 2005 4:43
  I have a JVC GR-D70U, and I have a same problem as following previous post. Hope it is not a hardware defect.
  
  Your help is appreciated.
  
  Re: JVC service or questions @ SHERREE TULL - 2nd Jan 2005 23:55
  I HAVE A JVC CAMCORDER MODEL GR-SXM250U AND EVERYTIME I TURN IT ON AND TRY TO RECORD A MESSAGE FLASHES SAYING REMOVE LENSE CAP WHEN THE LENS CAP IS ALREADY REMOVED AND IT WONT DO ANYTHING ELSE. I CAN PLAY BACK THINGS I PREVIOUSLY RECORDED ON TAPE AND THAT'S IT. HOW AM I ABLE TO GET THE REMOVE LENSE CAP MESSAGE OFF AND BE ABLE TO RECORD AGAIN.
  
  
  • Re[2]: JVC service or questions
    Kellie Boudreaux
    - 12th Jun 2007 14:51
    I HAVE A JVC CAMCORDER MODEL GR-SXM250U AND EVERYTIME I TURN IT ON AND TRY TO RECORD A MESSAGE FLASHES SAYING REMOVE LENSE CAP WHEN THE LENS CAP IS ALREADY REMOVED AND IT WONT DO ANYTHING ELSE.
    
    
• Re: JVC service or questions Ramon Duvall - 30th Jan 2005 5:32
  I saw your post onpechorin.com I own a JVC TV model AV-27D501. None of the three inputs seems to be able to receive a signal. All three inputs show a blue screen. Component input 2 is enabled,and when activated by DVD has a 1 second burp of sound, then continued blue screen with no sound. All my input equipment and cables check ok:the two tuners function normally. When I entered the service menu, the sound section was showing code 00000011. I have made no changes in the service menu as I am not qualified. Does this code mean anything? Do I need an expensive repair?
  
  Thanks, Ramon
  
  
• Re: JVC service or questions ben - 30th Jan 2005 11:42
  i have jvc gr-d70ek but my laptop will not read it i think i must be missing a driver disc. what can i do?
  
  
• Re: JVC service or questions
  Sundar
  - 30th Jan 2005 16:00
  I own a JVC GR-D30 digital video camera. The cameras CCD stopped working and always get a blank image on my viewfinder/LCD. The playback function is fine. I couldnt get the CCD spare in my city. also i would like to know the part number for this and the availabity in any of the Indian cities.
  
  Thanx
  sundar
  
  
  • Re[2]: JVC service or questions Allyson - 6th Mar 2005 4:55
    Hi, Sundra: It seems I got the same problem you had. Have you find out where you can find CCD part, and how much? Thank you for the help Allyson
    
    
• Re: JVC service or questions mangara elias luswaga - 30th Jan 2005 17:40
  Hi,I have a problem with JVC handycam model No:GR-AX48E(VHS-C).The problem is it si not switching off unless you remove it's battery,sometimes it stuck in vcr mode,moreover the zoom button does not funtion.Any idea is highly apreciated,
  
  
  • Re[2]: JVC service or questions
    raj
    - 31st Mar 2006 10:15
    Same problem Here
    
    
• Re: JVC service or questions Olaf Sorenson - 30th Jan 2005 21:55
  My GR-DVF 31 camcorder will not function. When I start it the screen flashes the date and time with dashes instead of numbers. It will not turn off except by removing the power cord. How cna I fix this? Olaf
  
  
• Re: JVC service or questions jim - 30th Jan 2005 21:56
  I have ajvc gr-dvl10e dvc. I have tried to use machine today- keep getting disconnect battery code e03. can you decipher please
  
  
• Re: JVC service or questions
  michael
  - 30th Jan 2005 22:59
  1998 jvc 32 in.
  model 32980
  
  no powerup
  
  manual or remote
  
  checked all possible power scenarios
  
  is this affordably fixable
  
  thanks
  
  
• Re: JVC service or questions Roger Neeb - 31st Jan 2005 1:51
  Hello, I have a JVC DVL220U (similar to the 320 and 520. I have the error message "Unit in Safeguard Mode" come up every time a tape is inserted. Can I turn off the safeguard mode by myself, or do I have to have a professional do it? Thanks for your time.
  -Roger Neeb
  
  
• Re: JVC service or questions Daniel L. Dunn - 31st Jan 2005 17:15
  I have an AV-36980 36" JVC TV with the same problem as vince describes for his AV-32980. It is about 7 years old and I come home one day and it's dead. I also have checked the incoming power fuse which is OK. Bad thing to happen right before the Superbowl! Any help is greatly appreciated. I am located in Austin, Texas area with zip code 78628.
  Thanx