JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Manjeri - 28th Mar 2005 7:16
  I have a JVC RCEX40 MP3/CD/VCD record player , this set has an Video/audio out put throguh three jack plugs. But Casseette player audio is not coming to this jack out put. Please assist how to extend the audio from cassette player to the jacks to enable copy ld audio cassettes into CD.
  
  Thanks and regards
  
  
• Re: JVC service or questions Manjeri - 28th Mar 2005 8:45
  I have a JVC RCEX40 MP3/CD/VCD record player , this set has an Video/audio out put throguh three jack plugs. But Casseette player audio is not coming to this jack out put. Please assist how to extend the audio from cassette player to the jacks to enable copy ld audio cassettes into CD.
  
  Thanks and regards
  
  
• Re: JVC service or questions
  khargonkar
  - 28th Mar 2005 11:42
  I have JVC video camera GR-D33AG sNO. 178Y0094.
  It was working fine till one month back.
  Last month my daughter operated the damera.
  Now I only see coloured vertical lines on the LCD / view finder.
  I had gone to the setting and selected the "Execute" .i.e factory setting , but not effect.
  The camera is recording ( what ever is displayed on the screen , it plays back)
  
  would request help, is it a setting problem?
  
  khargonkar
  
  
• Re: JVC service or questions
  ryan
  - 29th Mar 2005 14:12
  hi stacy.
  i have a JVC GR-D50AA digital video camera.im not getting any picture on the LCD\viewfinder when it's on the operation mode, just blurry coloured vertical lines. there doesnt seem to be any problem with the LCD\viewfinder when i play the tapes i recorded previously. what could be the problem be??.
  
  thanx
  
  
  • Re[2]: JVC service or questions Bruce Nicholls - 16th Apr 2005 2:39
    Ryan, I have just got the same issue as you. Have you resolved it yet? What is the answer if you have? Thanks Bruce
    
    
    • Re[3]: JVC service or questions
      Ryan
      - 18th Apr 2005 9:18
      i never got a reply...sorry.
      
      
  • Re[2]: JVC service or questions
    Rebecca
    - 20th Apr 2005 10:55
    I have the same issue. We separated the two halves of the camera but the connecting cord was still intact and we now still have the same problem. Looks like we'll take it in for service but that will be costy. It's a pity because we have not had the camera long--less than 2 years.
    
    
• Re: JVC service or questions tony.webb@ghosts-uk.net - 29th Mar 2005 17:40
  Take all of the screws out of the exterior and also behind the LCD. There is also a screw in the S-Video port if yours is equipped. Carefully pull the two sections apart. It will take patience. Looking from the rear of the camera, there is a connector joining the two halves. Disconnect it. Wait about 5 minutes. This appeared to do a "hard reset" on the camera because I had to reset the date and time and all of my settings. This took about an hour but, I had to hush a 2 week old baby a few times. I have been error free for 3 days now. And that is a record for me. Hope it keeps working and I hope this works for someone.
  
  
• Re: JVC service or questions laura Schempp - 30th Mar 2005 2:49
  The other night when I turned my JVC Gigatube (model # 126C3037) on it started to play and then it shut off. Whenever I turned it back on the sound would not work. Everything else is working as it normaly would there is just no sound what so ever. I didn't recieve an owners manual with this product. So I have no clue what I should do to get it playing again. Please help.
  
  
• Re: JVC service or questions Richard Mendoza - 30th Mar 2005 19:58
  My 32" jvc model no.11333508-A won't turn on, timer light keeps blinking and smeit smells like something is burning.
  
  
• Re: JVC service or questions
  Mr.Wilson
  - 30th Mar 2005 20:16
  I bought a KD-sx9350 car sterio and the kid has the wires removed from the wire harness, I was wondering if there is a diagram as to what color wire goes where in the wire harness? Thanks in advance Mr.Wilson
  
  
• Re: JVC service or questions mark - 31st Mar 2005 0:19
  I HAVE A 27" JVC TV MODEL AV-2750S ITS APPROX.15 YEARS OLD.THE SPEAKERS ARE MOUNTED ON THE SIDE. DURING LOW TO MEDIUM VOLUME SOUND CUTS OUT TO LOWER VOLUME AND THEN SUDDENLY COMES BACK. I THINK BOTH SPEAKERS ARE AFFECTED AT THE SAME TIME. IF I TURN UP THE VOLUME ALL THE WAY THE SPEAKER(S) COME BACK ON. I THINK ITS NOT THE SPEAKER THEMSELVES BUT MAYBE SOMETHING TO DO WITH A VOLUME CONTROL THING INSIDE TV. I HAVE ALSO NOTICED POSSIBLY ONLY SOME CHANNELS ARE AFFECTED BY THIS DIFFERENCE IN VOLUME. I WOULD LIKE TO REPAIR THIS MYSELF SINCE BRINGING IT IN FOR SERVICE WOULD INVOLVE LIFTING A HEAVY TV. CAN YOU HELP. WHAT DO YOU THINK IS WRONG? IS THE "PART" EXPENSIVE? COULD I DO IT MYSELF? WHERE CAN I ORDER PART FROM? THANKS.
  
  
• Re: JVC service or questions Neal - 31st Mar 2005 15:26
  JVC 35" Model 35790 purchased in 1997
  
  TV guide plus was working OK. Put in new TV stand, and unhooked TV. Upon re-hooking up, TV guide plus will not work. TV is hooked up exactly same (I only disconnect at the wall; did not unhook anything on back of TV) Keeps telling me to input setup. I have used my real zipcode 68116, I tried the 99999 for zipcode, tried 00000 for zipcode, unplugged TV overnight. Have done tuner setup, then TV Guide setup. TV works fine except for TV guide plus.
  
  No cable box used.
  
  Any suggestions?
  
  Thanks
  
  Neal
  
  
  • Re[2]: JVC service or questions dot - 17th May 2005 6:51
    i'm having the same problem...did you find a solution?