JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Attabur - 29th Aug 2005 9:34
  Its a nice initiative.
  
  Hello,
  Im facing a probs with my JVC handy cam. I bought it from UK abt 20 months back. Problems:
  
  1. Zoom switch is not working properly( As I feel that inner carbon has gone out of order from my past exprience). [Problem started since 1 yr back]
  If I'm trying to zooming any object then it can't focus the zoom on that, its comming back when I'm leaving the Manual Zoom Switch.
  
  2. This problem started since 3 months back. When I turn on my camera the cant view anything in LCD Display/view finder. Its comming some abstract thing of the real Image. After sometimes gradually its becomming okay and after 30 mins again the same problem happening.(I asked about this problem with a technician and he replied its called CCD problem)
  
  So please do inform me with the best solution for above mentioned problems. I am using the Mini DV tape(JVC D 270, may be coz I'll write you with model number)
  
  Thanking you
  
  Attabur
  
  Email: attabur@yahoo.com
  attabur@gmail.com
  coldblooded38@rediffmail.com
  
  
• Re: JVC service or questions tama morgan - 29th Aug 2005 17:58
  I have a jvs television model av355s1 I believe this is correct I doing this from memory. The power was off for a time and the sound has not worked since. Is there a certian reason this might have happened? What should I check before call a repair man..
  
  Thanks
  Tama Morgan
  
  
• Re: JVC service or questions Mike Basich - 30th Aug 2005 2:36
  I have a JVC Digital Video Camera GR-D70U that I haven't used in 2 months, however when I went to use it yesterday, I get a Lens Cap Error. Please tell me a fix for this. I have noticed a lot of people having the same problem.
  
  
  • Re[2]: JVC service or questions Bob - 11th Nov 2005 7:06
    Same problem here. I spent over $500.00 for this piece of junk!
    
    
• Re: JVC service or questions
  Irwin
  - 30th Aug 2005 10:11
  I have the infamous Len Caps problem on my GR-D53. It really makes me want to get my money back. This product is ripping my money off when I've just used the cam for just only a few times.
  
  Took it with awesome care, whats the point? Only used indoors... And it still.. kaput? I want my money back......
  
  
• Re: JVC service or questions
  mike shouse
  - 30th Aug 2005 12:47
  I have a KD-G200 JVC car stereo and I have lost the manual. Can I download one? I really only need to know how to set the clock, I've tried everything and it is driving me CRAZY!!! Please help.
  
  
  • Re[2]: JVC service or questions
    Linda
    - 21st Sep 2005 23:08
    I'm having the same problem have you figured it out yet??
    
    
    • Re[3]: JVC service or questions
      Radsxxxx
      - 2nd Oct 2005 3:57
      Press the SEL (select) button for 2-3 minutes then use the volume control to adjust the hours or minutes.
      
        See 1 more comment...
      
      
  • Re[2]: JVC service or questions
    T.J.
    - 17th Oct 2005 5:59
    Maybe I'm slow or something. I tried the select button and it just went into demo mode and then showed the time but wouldnt let me change it. Please Help.
    
    
• Re: JVC service or questions Wanetta - 30th Aug 2005 16:44
  Model GR-D33 is reading E01 Unit in safeguard mode remove and reattach battery.
  
  Help!!
  
  Thankyou.
  
  
• Re: JVC service or questions Joy Covita - 30th Aug 2005 19:17
  Hi there,
  
  I purchased this JVC GRD90U on 2002. I never used them that much, and when i tried to use them, when i put them on the A which to record there is no picture showing at all. when i turned them on it kept on saying lens cap on. but i did took out the lens cap but. it's not working at all, what should i do.. there is no picture showing at all only when i play old videos it work but i cannot record a new video.. what is seem to be the problem, please help!!
  
  Joy
  
  
• Re: JVC service or questions
  Ron Snelgrove
  - 31st Aug 2005 0:55
  I have a JVC television (model AV32FA44, 32" tube from the i'Art line, less than two years old) that has:
  
  *recently been shutting itself off (sometime after being on for a few minutes, other times for a few hours),
  
  *the power/standby (green) LED flashes
  
  *the only way to "solve" this problem is to unplug it and plug it back in
  
  *today, there is no video, just audio (the TV did make a sharp snapping sound when I first turned it on).
  
  Regards,
  Ron Snelgrove
  
  
  • Re[2]: JVC service or questions yourself - 5th Sep 2005 1:47
    hi there
    
    
  • Re[2]: JVC service or questions
    N. Shambare
    - 15th Mar 2006 14:12
    Were you able to solve your problem? I have a similar problem with the same model.
    
    
    • Re[3]: JVC service or questions
      Ron Snelgrove
      - 15th Mar 2006 23:38
      I ended up having the television repaired. It was at the shop for about 5 weeks (apparently JVC Canada is _really_ slow in shipping parts to repair shops). This is the information that I received from the repair shop. The technician ended up replacing (all prices in Canadian dollars) * 2 capacitors (part number "XZCAP", $9.00 each) * 1 integrated circuit (part number "XZIC", $12.50), and * 1 transistor (part number DTC124EKA-X, 571234, $6.45). Apparently the transistor received too much voltage and, of course, blew, and took the other parts with it. The tech told me that it was highly unlikely that the blown transistor was due to a line-surge, as the internal fuse was still intact. The total bill was $255.25 (with $39 in parts, that leaves about $216 for the service call, labour, delivery charge, taxes for two levels of government). I hope that this helps, and good luck with your television.
      
      
• Re: JVC service or questions Wally - 31st Aug 2005 2:32
  I have a GR-AXM225 camera and the tape wont come out and gives an error code 01
  unit in safe mode, Remove and replace battery.
  Can you tell me what to do? Please help.
  
  
• Re: JVC service or questions
  Tamer Elgendy
  - 31st Aug 2005 8:31
  Model: JVC GRD90
  
  I have an intermetant problem " there is no image (dark screen) and give the message "remove lens cap"
  
  Please advise
  
  Thanks