JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions
  Dennis Casey
  - 19th Feb 2006 2:05
  I have a JVC model number GR-M7 camcorder it is about 12 years old and it still works great but now after I record anything and play it back on my VCR the audio has a loud humming sound. Do you have any idea what this may be?
  Let me know when you have a chance. Thanks.
  Dennis
  
  
• Re: JVC service or questions Nick - 20th Feb 2006 1:04
  I have a JVC Car Head Unit... KD-LX50R I am looking for a part that looks as if has been caught in the internal workings, it is a small cable.
  
  I have the JVC part number but seem unable to source it.
  Part number
  WJT0030-001A
  
  Please could you help
  
  Nick
  
  
• Re: JVC service or questions erika - 20th Feb 2006 1:27
  I have the jvc camcorder model gr-d30u, and just recently i turned it on, and it says lens cap. My lens cap isnt on and i get absolutely no color on the screen, it's just pure black. I know it isn't the screen, because it can play my tapes. Can anyone help me out?
  
  
  • Re[2]: JVC service or questions John - 20th Feb 2006 15:30
    e-mail sent explaining procedure etc to obtain the free repair on this fault.
    
    
• Re: JVC service or questions Michael Aberilla - 20th Feb 2006 10:24
  I have a problem with my JVC Video Camera Model GR D33u. It says lens cap on even if I already removed the lens cap. Then the outline of a man, a tree and a forest is blinking. There is no picture. I hope you can be of assistance.Thanks.
  
  
  • Re[2]: JVC service or questions Azzedine Abid - 19th Mar 2006 22:43
    Hello, I have the same problem, I dont know really wot is the problem, but also i didn't use the cam for a long time almost 1 year. Please if u have any feed back let me know . Many thanks
    
    
• Re: JVC service or questions Mallikarjuna.A - 20th Feb 2006 13:17
  I have a JVC GR-D33 Camcorder for the last few days I am observing a problem with the product, When in A mode or M mode (camera modes) no image appears on the viewfinder or screen (The camcorder was idle for nearly 2 months and it was not charged).
  
  The camcorder is not able to read any image. When set to the camera modes, it says "Remove lens cap" for the first 5 seconds. This happens even when the lens cap is removed and then the camera is turned on.
  However playback works fine, when the camera is set to the Play mode.
  
  Please help
  
  As I am from INDIA (Bangalore) I would like to know the service centres near my place.
  
  Thanks in advance.
  
  
  • Re[2]: JVC service or questions
    Veeru Pendyala
    - 3rd Mar 2006 8:10
    I am seeing the same problem with my gr d33 now. We last used it about a week back. Appreciate any info on the problem/solution. Thanks
    
    
• Re: JVC service or questions
  Dorraine Thompson
  - 20th Feb 2006 23:53
  JVC compact recorder # GR-AXM341U. Approximately 2 years old. Still have stickers stuck on the sides. Unit will not turn on; power light not on; battery charged. This problem first started with decreased filming time off of the battery then gradually escalated from new batteries until the last battery bought Dec 21, 2005 along with a new charging unit did not power the video recorder at all. I would like to make this thing let go of my tape that's been in lockup for several months. I've had battery msg's and clean head msg's. I have followed thru with fixing these msg's. This unit is barely used, it's stored inside of the house in a cabinet. What's wrong????? D. Thompson
  
  
• Re: JVC service or questions Charlie - 21st Feb 2006 0:35
  JVC Model 32750 when powered up red monitoring light comes on for split second then nothing happens- TV goes quite. Read about a C926 cap. Is this cap a likely culpret? Is the cap easily replaced? Can you sell me the cap? Does a schematic exists to assist me locating cap? Anybody in San Antonio,Texas you would recommend taking whole TV in for fix? Any help given is appricated-THANKS
  
  
• Re: JVC service or questions
  Jason
  - 21st Feb 2006 3:56
  I hooked my newly acquired JVC GR-D90U up to my Windows XP (SP2) machine the other day, through the Firewire port on an Audigy 2 Soundblaster card. The result? No luck. I tried every fix I could find by browsing forums where people were having the same issue... and still no luck.
  
  I knew that my port worked, after using several Nikon DSLR's on it, and I knew the camera and cable worked, after transferring successfully to my Mac. Mac's just seem to have better luck when it comes to IEEE compatibility though.
  
  I remembered something from my days in Nikon tech support. IEEE devices on Windows machines can sometimes be very picky about the chipset of the IEEE 1394 Host Controller. Knowing that my Audigy used a TI chipset, I decided to go out and buy an IEEE 1394 PCI card with an NEC chipset.
  
  Installed it, plugged in the camera - and it now works every time. The solution here is almost assuredly to find a Firewire PCI card with an NEC chipset.
  
  Best of luck!
  
  
• Re: JVC service or questions Deanna Bramhall - 21st Feb 2006 5:11
  Hello my name is Deanna Bramhall. My husband and i recently purchased a JVC camcorder in October of 05. And now in the first of February when i turn it on the screen shows LENS CAP ON, but the lens cap is off? Whats the problem? If you could send a number or a link that would be great.
  
  Model No. GR-DF45OU
  
  Serial No. 120T1036
  
  Sincerely
  
  Travis and Deanna Bramhall
  Reply ASAP
  
  Thank You
  
  
  • Re[2]: JVC service or questions John - 22nd Feb 2006 11:59
    E-mail with info to Yahoo returned as not a valid address.
    
    
    • Re[3]: JVC service or questions Sara - 25th Oct 2007 16:55
      Hello I'm having the same issue with a JVC GR-DF45OU The lens cap is off and it says remove lens cap anyways what do I do? please get back to me soon need it to work super bad
      
      
• Re: JVC service or questions
  Christopher
  - 21st Feb 2006 15:59
  Hi I have a JVC AV-36D502 and the problem is that there are lines/wave going across the screen diagonally form top right to bottom left and vice versa. It is most noticable on darker settings. What can be done to rectify this?
  
  Thank you for you help
  
  
  • Re[2]: JVC service or questions John - 22nd Feb 2006 18:20
    Mail returned when using name in red, however does this fault disappear when you remove the aerial, as if it does, then your TV is picking up RF interference from some source.