JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Adam Collick - 15th Mar 2006 13:23
  I have a JVC AV-32R47SK widescreen television.and the picture aspect is too big for the television.I have tried everything to change the size but if anything is written at the bottom of the picture then it is impossible to read. If you could help it would be most appreciated
  
  Adam
  
  
• Re: JVC service or questions
  IQBAL
  - 15th Mar 2006 14:20
  When i want to record, it goes to pause moode and message reads ''lens ca' although there is no cap on the lens. This problem started recently (I did not use camera for more than ayear)
  
  Model JVC GRD50 AG
  
  
• Re: JVC service or questions
  Jenna
  - 16th Mar 2006 15:46
  I recently purchased a used car with a JVC KD-SC800 cd player in it. It did not come with any instructions/manual and I can not find any directions online how to change the clock or other instructions on how to change settings. Could you please send me this information? Thanks
  
  
• Re: JVC service or questions Raghumani - 16th Mar 2006 17:27
  Hello
  
  i would like to know if there is any service centre for JVC handycamera in Chennai (India) . pls advise me the complete address and phone number of the same .
  
  Regds
  
  
• Re: JVC service or questions nick - 17th Mar 2006 0:24
  JVC AV - 27820 CRT
  
  when the rear RCA video jack is wiggled, the video on the screen compresses down into a line; you can still see movement in this 3mm line. now the tv no longer shows any video, the power light just blinks.
  
  any help is greatly appreciated!
  
  
• Re: JVC service or questions
  William Guo
  - 17th Mar 2006 5:02
  I have a JVC GR-D90U. Now when I turn it on, I got an error message "E01 UNIT IN SAFEGUARD MODE, REMOVE AND REATTACH BATTERY". I tried many times, always same error. When I put it in DSC mode, I can see the battery status is full, but I can not take a picture. It seems stuck in some status. What should I do for it?
  
  Thanks,
  William Guo
  
  
  • Re[2]: JVC service or questions La - 30th Apr 2007 22:02
    Hi, I have the same problem, I mean «REMOVE AND REATTACH BATTERY, UNIT IN SAFEGUARD MODE» on JVC GR-DVM75U. I can't film or take pictures. The battery is charged and my camera was functionning yesterday. How can I reuse my camera? PLEASE, help me! (Can you answer me in french?)
    
    
• Re: JVC service or questions Fox - 17th Mar 2006 7:32
  I have a JVC GR-DVM model, specifically, a GR-DVM75U. As I posted in a different section, I am having an issue regarding powering the device, or rather making the device GET power. After leaving it on the charge overnight, I checked it the morning after, and it would not turn on. I removed and reinserted the power cable, and I got a "click click" sound, sounded like an electrical click, like it was powering on and back off again. I removed and reattached the battery. Same thing.
  
  I'm a bit curious. How would I go about fixing this poor old thing? It's worked well up to now aside from a minor little fiasco involving tape jams which I already fixed. I'm most likely Not under warranty, given how long this thing has been in my hands, and I am in the 78705 area. Please help as best you can.
  
  I am assuming, just a hunch, that this is a battery issue, as it has all the right earmarks, but I'd rather not blow 60 bucks on a hunch. If you could help I would greatly appreciate it.
  
  
• Re: JVC service or questions Bob higgs - 17th Mar 2006 14:33
  I have a JVC GR-D30U that I hardly use. Last time I turned it on I could play a tape fine but couldn't record. The camcorder thought the lense cap was still on and kept giving me that error. The lense cap was off. Any idea what causes this error?
  
  Thanks
  Bob
  
  
• Re: JVC service or questions Mathew Koshy - 17th Mar 2006 20:50
  We have a JVC Digital video camera, model number GR-D72U. I have problem when I try to record. At first it tells me that the lense cap is on when it is not. Second I can not see anything on the screen. It has all kinds of ikons on the screen. Lower left hand side a hand, lower middle two arrows going either side pointing to a person like immange on the lefy and castle like image to the righ. Upper left A in a green box, just below that an A with bucket on its side.
  Can you help me with what the problem is?
  
  Thanks
  Reagrds
  Mathew Koshy
  
  
  • Re[2]: JVC service or questions Davy Garg - 18th Mar 2006 2:11
    The CCD Block Assy needs replacement 100% Guaranteed. Regards, Davy Garg
    
    
  • Re[2]: JVC service or questions John - 18th Mar 2006 12:13
    Yes, it will almost 100% be the CCD failure, however model GR-D72US is on JVC's list of "free" repairs for this particular fault, so that should be checked on.
    
    
• Re: JVC service or questions
  Brian Taylor
  - 18th Mar 2006 1:25
  Hi I have a jvc hx-d7 that is less than one year old. Anytime I try and use the stereo it says protect and then shuts itself off. I am unable to use any mode of the stereo what could be wrong?
  
  
  • Re[2]: JVC service or questions Derric - 13th May 2006 22:12
    I have the Same Problem... do you know how to fix it?