JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions William Baker - 7th Jun 2006 2:11
  Stacy, I have JVC TV Model: AV-27920, on my work bench. If the TV has sat for a while, I can plug it into the wall, and without doing anything else, the TV comes on(sound) and I can hear the tube firing up. The TV comes on for about two(2) seconds and then turns off. The red standby LED blinks at a dim slow rate. I need tech info and all suggestions.
  
  Thanks,
  William Baker
  w.baker6632@comcast.net
  
  
• Re: JVC service or questions Mark - 7th Jun 2006 11:04
  G'day stacey,
  I have a DVC GR-D53AA my computer is registering that there is hadware when i plug the usb in but i don't think that the drivers are registering. I have the usb driver disc and have tried to install a number of times. Do you have any ideas?
  Thanks M
  
  
• Re: JVC service or questions brian curley - 7th Jun 2006 12:35
  My Gr dvm75u digital camera is giving me a SAFEMODE message. It's starts to play and then cuts off. It says disconnect batter and reconnect, but eventhough it starts off like it is fixed; it goes back to safe mode again. What to do?
  
  
  • Re[2]: JVC service or questions chris - 15th Jun 2006 0:00
    u figure this out? mines doin thesame thing
    
    
• Re: JVC service or questions
  John
  - 7th Jun 2006 15:17
  Your assistance please,
  
  JVC Digital video camera model GR-D20EK.
  
  Works fine until changeing the tape, once tape changed, error message, please wait condensation, this effectivly makes the camera unusable.
  
  Ant surggestions
  
  Regards. John
  
  
  • Re[2]: JVC service or questions JB38 - 7th Jun 2006 18:33
    Explanatory e-mail sent.
    
    
• Re: JVC service or questions janice lee - 7th Jun 2006 15:25
  I have a gr-d70u
  it indicate that the lens cap is on when it's not, however I able unable to view a subject to record. I can watch a video that is on the tape. When on it says remove the lens cap and then pause in yellow. Please help
  
  
  • Re[2]: JVC service or questions JB38 - 7th Jun 2006 18:39
    Explanatory e-mail sent re this manufacturing problem.
    
    
• Re: JVC service or questions Andy - 7th Jun 2006 19:52
  I have JVC GR-DVM70 U MiniDV camcorder. It's rarely used in the 4 yr. period I've owned it. I used it the other day to record and on playback the sound was intermittent at first and after several reruns full sound returned. I tried a dry tape head cleaner and now it doesn't have any sound. The picture plays back fine just no sound. What are the possible problems?
  
  
• Re: JVC service or questions Anthony - 7th Jun 2006 19:54
  I just installed a JVC KD-S5050 CD player in my truck and all it does when I go to turn the key the display says "see ya" and turns off right away. I tried to change all fuses, tried to reset the unit and it still doesn't work. When I hit the display button, it shows the clock for about 10 seconds and then shuts off again. How do I fix this?
  
  Thank you.
  
  
  • Re[2]: JVC service or questions
    Ken
    - 27th Feb 2007 0:24
    Did you get an answer on this. Mine is doing the same thing....driving me nuts. Thanks for any help you can give me
    
    
• Re: JVC service or questions Amanda - 7th Jun 2006 22:39
  I have a JVC GR-SXM330 that is getting an error message that it is in safeguard mode and it is eating tapes.... how can I fix it? Or how much will it cost to fix?
  
  
• Re: JVC service or questions William Baker - 8th Jun 2006 0:34
  Stacy, I have been reading your pechorin.com replies.
  
  Stacy, I have a JVC AV-27920 27" TV that initially comes on when it is plugged onto an outlet. This TV comes on for about 2-3 seconds before it shuts down. I observe sound and the firing of the flyback, and then the TV goes into its' shut down mode.
  
  No user input is given to the TV-plug the TV into the outlet, it fires on for 2-3 seconds and then shuts down. In this shut down state, the front panel red LED is dim and blinks at slow constant rate.
  
  This TV stays in the shut down mode even if it is unplugged and then plugged right back in. When I unplug the TV and let it sit for a few minutes before plugging it back in, the TV fires on for about 2-3 seconds to shut back down.
  
  I have no clue! As well, I have no tech info. A Sam's would be helpful, along with any input you may give. My mind is open!
  
  Thank You,
  William
  w.baker6632@comcast.net
  
  
  • Re[2]: JVC service or questions JB38 - 8th Jun 2006 6:28
    Information re problem already sent after previous request.
    
    
• Re: JVC service or questions
  Brian
  - 8th Jun 2006 4:02
  Hello,
  Hopefully, you have run into this problem before and can suggest a quick and economical fix to the problem.
  Our 32 J.V.C. I'Art Flat Screen T.V. which is less than 2 years old recently lost its picture. The sound is okay but we don't get any picture.
  Can you suggest what is wrong and how to fix it. Also, if you could estimate how much a shop would charge to fix it would be appreciated.
  Thank you.