JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions
  Chris
  - 5th Aug 2006 21:45
  Hi, i have GR-D30U JVC video camera and im not sure whats wrong with it. I can't record or view anything because it says on my screen, "Condensation, Operation Paused". It seems to "pop up" every now and then. I've tried leaving it in less dense rooms and I have left it on for approximately 6 hours, but still nothing has seemed to happen. I would appreciate a solution. Thanks for your Time.
  
  
• Re: JVC service or questions Aharon - 5th Aug 2006 22:21
  hi
  i have the GR-DVL520A JVC with the E04 Unit in safeguard mode
  what can i do ?
  
  i will be thankful if you help me i cant do nothing with my cam.
  
  Aharon
  
  
• Re: JVC service or questions S.Prakash - 6th Aug 2006 4:25
  Hi there,
  
  I have a JVC camcoder model Gr-DVP3.I have lost the driver after formatting my PC and dont have the CD-ROM either to re-install the driver to assit in transfer of pictures and video from camcoder to PC. Where can i obtain this driver on te internet.
  
  Please do assit me on this. Thanking You.
  
  Regards.
  
  
• JVC Video Cam GR-DX97U - Zoom Problem Hanni - 6th Aug 2006 19:17
  Hi, When I use the Camera automatic Or Manual the zoom automaticly goes "in
  
  "How can I fix this?????
  Please Help me.
  As for know, I use the camera one finger pressing the REC and one constantly pressing the W for the zoom.
  
  Thnks
  
  
• Re: JVC service or questions vladimir - 6th Aug 2006 23:55
  AV-27D305 - D- series JVC
  I'm having traboul with my tv. I turn it on, it clicks, no image, and On Timer light comes on. Any idea what's going on?
  
  
  • Re[2]: JVC service or questions
    dee
    - 25th Aug 2006 13:54
    I'm having the same problem. TV turns on, no picture and the blinking timer light is on. Did you find out how to fix it. The tv is only 6 years old. Thanks
    
    
• Re: JVC service or questions Champak Lal - 7th Aug 2006 0:11
  Hi,
  i have a 29-inch triple stereo colour tv
  AV-S29MS6
  it switches itself off == the eco lamp and on timer lamp start flashing and the power switch is red.
  
  it happened a few months ago and the tv was switched off for a few days
  when switched on it worked for a few months and switched itself off
  after switching it off for a couple of days it worked for a few hours
  but now it switches itself off immediately after it is turned on
  the eco lamp and on timer lamp start flashing and the power switch is red.
  
  is this repairable and is it a mojor promblem
  
  Thanks & regards
  Champak
  
  
• Re: JVC service or questions
  Victor
  - 7th Aug 2006 1:30
  I have a JVC 27" AV-27750 that will no longer power on. Whether using the remote or the front panel button the same result is that the TV clicks, the power light lights up and immediately turns off.
  
  Is this a repair that can be done relatively inexpensively? The TV's picture was still decent so it would be worth it if I didn't have to put a lot of money into the repair.
  
  
• AV-27F702 Will Not Turn Off
  Dan
  - 7th Aug 2006 18:07
  TV is on and when I hit the power button on either the TV or remote to turn it off the following happens. Sound goes off, red power/timer light goes off, but picture stays on. Hit the power button again and picture goes off, red power light comes on, sound comes on, and picture comes on as normal. In other words, we cannot turn the TV off except by unplugging it.
  
  This problem was intermittent about 3 months ago, and was able to fix it by just unplugging the TV and plugging it back in. However, now the only way to turn the TV off is by unplugging it.
  
  Any ideas or do I have to lug this beast to the repair depot?
  
  
• Re: JVC service or questions
  MANUEL A GARCIA
  - 8th Aug 2006 4:20
  YES I HAVE A JVC DVD RECORDER MODEL # IS DR-M10S I LOOK UP ON THE PRODUCT AND IS SAY IT IS A DEFECTIVE PRODUCT FROM THE JVC MANUFACTOR. ALL I HAVE TO DO IS SENT IT TO A SERVICE CENTER BUT I NEED TO KNOW WHAT STEPS TO TAKE I ALSO NEED A PHONE NUMBER TO CALL FOR DETAILS. ON HOW TO SHIP IT PLEASE ADVISE THE PROBLEM WITH THE JVC PRODUCT IS THAT IT STARTS FLASHING SHOWING LOADING AND I HAVE TO DISCONNECT IT. IT STOPS FOR A FEW MINUTES AND THEN IT STARTS AGAIN.
  
  
• Re: JVC service or questions Manuel - 8th Aug 2006 10:11
  I´m trying to preset TV stations with a JVC TV AV-F29MX3 in Spain (Europe). I can see DVD in S-Video (1,2 and 3) ports, but I can´t preset channels in TV mode throught the aerial. If you can help me on this it will be very useful for me. Thanks in advance and have a good day.
  
  Manuel