HELLO STACY I HAVE THE GR-SXM87U OR EITHER THE GR-SXM37U JVC SUPER VHS DIGITAL SINGAL PROCESSING CAMCORDER AND IAM GETTING ON THE SCREEN S-ET AND MY PICTURE IS SCRAMBLED IAM ALSO NOT ABLE TO FIND A CLEANER TO CLEAN MY CAMCORDER CAN YOU PLEASE HELP ME THANK YOU

hi my jvc grdx77us is saying "please wait condensation detected" for hours and hours and i can't use it what can i do

Posted wrong model number earlier: Our JVC GR-D33U shows no picture on the veiwfinder screen, it only says LENS CAP with the lenscap removed.

my camcorder keeps saying the lenscap is on and i cant get a display on my lcd screen.i found something that there was a defect in this camera.the lens cap is off the cam and i need some help.i have a gr-d30...it has a u behind it if that helps what should i do.

my jvc av-27820 has audio on all channels excet channels 8,9 and tnt, channel10 comes on with loud roaring sound. Hope you can help.

Hello, Just found your Pechorin's site while searching for JVC error codes. I have a KD-LX100 car stereo that will not eject the CD and was showing an error code 25. After turning the car off then back on it now shows error code 26. Any help would be greatly appreciated. Thanks, Keith

I have a JVC GR-AX800U. Everything works fine except the viewfinder indications. There are none. Is this a major or minor problem? Worth getting fixed or not? Thanks in advance for your help.

I have a JVC 27" Tv, Model: AV 27920 Manufacture Date Nov 1998 Last night, turned the TV off, went to bed. This morning, when I turn the tv on, it makes that high pitch turning on sound, but no image comes up, then a few seconds later, it "shuts off", and the red LED starts semi bright blinking. pushing the power button does nothing at this point. Also, for the last few months, the very top of the tv was being reflect back town along the top of the screen.. making the top of the image slightly distorted.. and i think it has been getting worse.. please advise, (should i attempt that capacitor replacement as described by other customers?) thanks Gabriel

I have an AV48WP30 48"inch Tv and Im having a problem fixing my convergence the red lines are fine but i cant figure out how to move the blue, and when i go to the convergence screen everything is aligned but the top left corner and the top middle both are yellow crosses with blue crosses under them

I bought a BN-VF733 battery for my Everio G GZ-MG21u camcorder.I attached it to my camera, plugged in the power cable and waited for 24 hours. When I turn on the camera the screen shows a diagram of a battery and a camera with arrows pointing to each and an 'x' in the middle. Above that diagram are the words "communicating error". I pushed the 'reset' button and that didn't fix the problem. Is there a fix for this? Thank you, Jim