PECHORIN'S home   account   archive   eshop   globalmediapro
.
.


Post new message


Home

JVC service or questions

Stacy Sample Posted Jan 31, 2004

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better. Stacy Sample JVC Service & Engineering Houston, Texas

Reply

Share |
6,445 comments, pages:   « 1 2 3 418 419 420 421 422 423 424 643 644 645 »

    I have a JVC GR-AXM230 camcorder and it's about 3yrs old but hardly used. I just replaced the battery with a Radio Shack Cat. # 23-381 6v 1600mah battery. I allowed it to charge and the camera was working fine. Now it eats the tapes even if I'm using the power cord without the battery. But before replacing the battery the unit was working fine except for the original slim battery was charging up but then stop working within 5 minutes. Have you ever heard of these problems and if so are there any fixes.

    Reply

    Hello, My JVC GR-DX77U is zooming in automatically and won't adjust so zooming can be done manually. Thanks.

    Reply

    Hi I have a JVC GR-D30U and when I turn it on its like its rewinding really fast and then it says "UNIT IN SAFEGUARD MODE" "REMOVE AND REATTACH BATERY" And above that it says EO6 The Ser# 118T8678 That would be great if you could help me out, Thanks so much -Kenny Sanders-

    Reply

    Re: JVC service or questions

     Terry Posted Jan 28, 2006

    I have a JVC GR-DX77U and the zoom keeps engaging when I turn the camera on. It zooms all the way in like it is stuck. I back it out and it starts right back. The battery also runsdown quickly while the camera is turned off. Thanks, Terry

    Comment 1, Last comment by Kyle Feb 17, 2006

    Re: JVC service or questions

     John Posted Feb 16, 2006

    I have a 27" JVC (AV-27320) and the picture has become extremely dark no matter how high i turn the bright up. Any suggestions, or is this just going to cost an arm and a leg to get fixed? Also, IF i have to take it somewhere... any suggestions for NC?

    Reply

    WE HAVE A JVC 32 INCH TV, ABOUT 6 YRS OLD. IT COMES ON AT 9:00 EVERY EVENING. ALSO IT WILL SWITCH CHANNELS IF YOU ARE WATCHING IT. TO THE SAME CHANNEL EVERY NIGHT. WE HAVE WENT THROUGH ALL THE PROGRAMS AND NOTHING SEEM TO BE SET. WE UNPLUGGED ALL THE VCR AND DVD PLAYERS AND IT IS JUST PLUGGED TO CABLE, AND IT STILL DOES THE SAME THING... HELP

    Reply

    Re: JVC service or questions

     HECTOR Posted Feb 15, 2006

    I bought a JVC Camcorder (model# GR-SXM260U) on Feb. 2004. The last time I used it was about two months ago. Today when I tried to record, a message comes out on the screen... EO3 unit on safegaurd mode remove battery and than to reattach battery back again, I do that but still does not work. What can I do to fix this problem? thanks

    Reply

    I have a relatively new JVC television that has developed a problem that I can't seem to fix. The black background box that is used as contrast for the different on screen adjustments and settings is now on the screen full time but it's just the black background. I can turn the black contrast background off by changing the setting to clear, but as soon as the setting times out the blank opaque black rectangle re apppears on the screen. It will go off briefly but this seems to be getting less frequent. Help, it's ruining the Olympics. Thanks,Tom

    Reply

    Hi, I have JVC SVHS S9600EU video. the problem is that if the TV station is tuned, there is a picture on the monitor, but no sound. If you play the tape or plug in the other source, audio is OK. So, it is lost from the tuner on. Any help or suggestion where to trace it? Many thks and rgds from Europa. Isjanovski/Macedonia

    Reply

    I have a JVC Digital Video Camera (Model # GR-DVL120U). The display screen that flips out does not show a picture. It only has a white screen. I could still view through the eye piece until today. If I push it to PLAY mode, I see only black through the eye piece. If I flip it to "A" in order to record, it gives me the E04 IN Safeguard Mode error. How can I repair this? Any places in Wilmington, North Carolina? Thank you, Jaime jfpaschal@gmail.com 910.512.8389

    Reply

Pages:   « 1 2 3 418 419 420 421 422 423 424 643 644 645 »



  


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed