JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions maurice coleman - 3rd Jul 2009 23:42
  i bought a jvc camcorder model #gr-d72u about 4 yrs ago, the last 2 yrs it's dispaly's the lens cap error. how can i fix this problem without sending it to the repair store. thanks
  
  
  • Re[2]: JVC service or questions Tony - 26th Jul 2009 2:18
    Replace the CCD device
    
    
• Re: JVC service or questions jim C - 4th Jul 2009 19:28
  I have an I'Art pro by JVC model # AV-56wp74.I belive I have a convergence problem.At the top of my screen there is a green and purple bow ,and image is distorted.I know about the convergence kit avalable for reparing convergence issues, however I'm not completely sure this is in fact my problem.If it turns out to be a convergence ploblem,can I use the kit and fix myself or is it to technical for the do it yourselfer like myself.please help if you can!!??
  
  
• Re: JVC service or questions Rob Kelly - 5th Jul 2009 3:54
  I'm getting the infamous "condensation, please wait" error message on my JVC camcordder GR-D22U. What's the fix?
  
  
• Spark
  Joel Caizares
  - 5th Jul 2009 7:32
  Good Day Sir / Mam,
  
  We Bought A JVC 29" Television ( AV-29JT14) Last Dec 2006 (Phils). It Did Work Well Until The Screen Turned Off A Week Ago & A Spark Is Heard Around 10 Sec Interval. I Did Inspect & Found Out That The Spark Is Produced From The Wire Connected To The Tube. It's Direction Is Towards The Circuit Board Attached To The Back Most Of The Picture Tube A Distance Of 3/4", Wire To PCB. Can I Fix This With Out Going To A Shop? Maybe A Faulty Resistor Or Capacitor Or Transistor?
  
  Your Reply Is Highly Appreciated
  
  Tks & Brgds
  joeL
  
  
• Re: JVC service or questions Gordon Vam Bibber - 7th Jul 2009 19:33
  I have a Jvc modelAV-36D302 the problem is ,you can turn the set on and it will play but if you turn the set off it will not turn back on and the power let flashes. Even if only for a short time.
  
  
• JVC GR-D50AS software
  Abdulsalam
  - 8th Jul 2009 7:05
  Unfortunately, my son broken the cd drivers for JVC GR-D50AS, and i can't download the software from net, can you help me how i can find drivers for my camcorder (JVC GR-D50AS) in the Internet..."
  
  Thanks,
  AbdulSalam.
  
  
• Re: JVC service or questions Darren Graham - 10th Jul 2009 2:42
  I have a JVC GR-D370U camcorder that is giving me "unit in safeguard mode" and eject and reinsert tape" And "04" messages on the display screen. I've tried removing the battery and reinserting the tape and everything in between. It won't pull the tape into the camera all the way, then it ejects it automatically. Can you please help???
  
  
• Re: JVC service or questions John Nyhan - 10th Jul 2009 4:12
  Have blinking On Timer on JVC Model AV-36D302. I did what the manual says: turn off and call tech.
  Is this worth repairing?
  Thanks for the help.
  
  PS: it weighs a ton
  
  
• Re: JVC service or questions
  Lee J
  - 10th Jul 2009 15:27
  Hello Stacy. I found you on Pechorin's website. I have a problem with my JVC TV that I desperately hope you can help solve. It is a Model AV-27020. The TV seems to be in timer mode. When we unplug the TV from the power source and plug it back in again, the TV turns on for about 1 second; however, the screen stays blank and we never get a picture. Then, the timer light on the front of the TV starts flashing. At the time of this email, the TV has be inoperable for over 24 hours. We thought that if the timer was on, we would just wait it out but, that doesn't seem to be happening. As long as the TV is plugged in, we get that flashing timer light only. What can we do to get this TV to work?
  Thank you,
  Lee J.
  
  
• Re: JVC HD HARD DISK CAMCORDER GZ-HD3U SILMAR DE LIMA SOARES - 11th Jul 2009 3:44
  Possuo esta maquina adoravel pois é pequena mas é grande na qualidade de video e audio,a minha única dificuldade é na captura via i.link IEE 1394,já fiz teste com MACCTONCH(NOOT)i.link IEEE 1394 até identificou a camcorder GZ-HD3U ABRIU A TELA FICOU ESCURO MAS O VIDEO NADA,TAMBEM FIZ TESTE COM UMA ESTAÇÃO COM O LIQUD 7 DA PINNACLE tambem apresentou os mesmo sintoma,o que fazer agradesso pela atenção obrigado...
  dados GZ-HD3U MODELO Nº001A SERIE Nº083C0605