JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions
  Marc C
  - 30th Jul 2009 14:38
  I have a JVC AV 32SF36 4 years old.
  There have been alot of storms and power surges in our area this summer and I think the set is fried. It won't power up at all. Is it worth trying to repair?
  
  mc
  
  
• Re: JVC service or questions
  leonardo
  - 30th Jul 2009 15:39
  Hi,
  
  I have a JVC HD7 bought last year at B&H... I used a few hours this camera - less than 10h...
  
  Last time I used it was in dec-08 and it was working fine. then today I was preparing it to use and when I plug the batteries (I have 2) and the power cable, the access/charge led blinks 9 times and then nonthing else happens I can not charge the battery (they are cold) and can not turn on the camera...
  
  please help!
  
  thanks..
  
  leonardo.
  
  
• Re: JVC service or questions Kelly Harmon - 1st Aug 2009 6:35
  jvc model c13311 Tv power light just blinks. Any idea why?
  
  
• Re: JVC service or questions
  John
  - 1st Aug 2009 13:34
  JVC GR-DA30U is stuck in safeguard. Initially it said remove battery or power supply. I tried every possible combination with no luck. I then tried removing tape, but it would not eject. It still says safeguard mode, but now says remove and replace tape (which I would if I could).
  
  
• Re: JVC service or questions Ken - 2nd Aug 2009 17:43
  Hi I have a JVC vodeo cam Model gr-d270u .
  It is safegard mode 01!
  What doese this mean?
  How do i fix this?
  Thanks Ken
  
  
• Re: JVC service or questions
  Cassie
  - 3rd Aug 2009 0:19
  I have a JVC GR-D275 that will no longer play videos in playback mode. It acts as if every tape is blank. The only thing on the screen is a blue screen with blinking dashes where the date/time should be displayed. Please, how can I fix this?
  
  Thanks for your time,
  Cassie
  
  
• Re: JVC service or questions Janet - 3rd Aug 2009 21:08
  JVC GR-D30 camcorder:
  Had "condensation operation paused" message. It is gone
  Now Iam trying to record nothing is showing on screen
  I have turned it off and on-- no results
  It shows recording on screen, but what I'm recording doesn't show
  Thanks
  
  
• Re: JVC service or questions Brad Cooper - 5th Aug 2009 4:40
  My JVC 25x optical zoom, super VHS, 1000 digital zoom, model # GR-sxm38u
  is in safeqaurd mode and I can't get it off. Please help.
  
  
• Re: JVC service or questions
  Tejpal Shargill
  - 5th Aug 2009 8:59
  I have a JVC GR-HD1 camera and found that the LCD screen and camera viewfinder do not show any images when recording.
  
  On a recorded tape the LCD in playback mode play a tape.
  
  The screen is bright white and sometimes has a green line on the left hand side.
  
  I have adjusted the brightness and reset the menu. No luck. Can you help?
  
  Tejpal
  
  
• Re: JVC service or questions Elaine - 7th Aug 2009 13:30
  I have a JVC GR-AMX230 camcorder
  When I push the record button it records for approx. 5 seconds & then goes back to pause?
  What am I doing wrong?