JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions
  Jason
  - 16th Nov 2004 17:11
  Model # KD-SX980. Not sure how to describe the problem. Unit turns itself off and back on again as if someone were hitting the power button. Does this at random intervals. Sometimes its constant (on-off-on-off) and sometimes it'll play without incident for several minutes. Very very annoying. Any input would be appreciated. Thanks.
  
  
• Re: JVC service or questions Charles Brand - 16th Nov 2004 20:11
  I purchased a JVC AV27D210 in 2000. It went into storage after about 3 months use and now want to use it. The remote and instructions were lost in the shuffle. It comes on and has a good picture BUT there is a huge black box on the screen that covers the entire screen except for about an inch around the edge. I read on the internet to unplug it for over 4 hours and then plug it back in that would hard boot it and take it back to the factory settings. That didn't work. I also read how to get into the service mode but the universal remote that I bought to replace the original won't let me do it. Got any suggestions...can I purchase another factory-type remote which might help? And I am having trouble finding the procedure to get into the service mode and what to do once I get in there...HELP!!!!! Thanks
  
  
  • Re: Re: JVC service or questions
    Unknown
    - 22nd Nov 2004 6:52
    You can go on JVC.com and buy the correct remote. Go to Accessory Store and put the TV model # in. You need to get this remote to be able to do all the functions the TV has to offer. A Universal Remote will only give you minimal functions. You may be able to get the user manual with the remote purchase or possibly download it for free if the TV is not too old. On JVC.com go to Service and Support > User manuals and follow the instructions.
    
    
• Re: JVC service or questions
  richmond adofo
  - 16th Nov 2004 21:24
  thanks
  
  
• Re: JVC service or questions Jason - 16th Nov 2004 22:11
  Getting the e-01 error code says it's in safeguard mode i took the battery off for a week still doesn't work help please
  
  
• Re: JVC service or questions jason - 16th Nov 2004 22:12
  gr-d31u model number sorry
  
  
• Re: JVC service or questions Dominic Fernandez - 17th Nov 2004 18:13
  Hi
  
  I have JVC TC 27 " , TV is working fine, but I think one of channels has been locked ( child lock). I donot have the operating manual and I donot know how to remove the child lock.
  
  The video is played normal, but a big black patch is coming on to the screen which I guess means the channel has a child lock.
  
  Please help me as to how can I remove this child lock now, also please let me know if I can download operating manual from any internet site.
  
  Thanks
  Dominic
  
  
  • Re: Re: JVC service or questions
    Unknown
    - 22nd Nov 2004 6:49
    You may be able to download the manual on JVC.com > Service & Support > user manuals and follow directions from there. If not...call (800) 537-5722 for operational assistance to get help.
    
    
• Re: JVC service or questions patrick sutton - 17th Nov 2004 19:19
  my stereo went just says protect on the screen and it wont let me play any cds.
  
  
• Re: JVC service or questions
  Kristina Whiteman
  - 17th Nov 2004 19:22
  I have a JVC GR SXM330 Video recorder. It was working fine for up to 6 hours a day, but recently it has started to shut down while it's taping. It will sometimes tape for as long as 50 minutes, but sometimes it will shut down after thirty seconds. The screen reads "EO3 Unit in Safeguard Mode". It then flashes to "EO3 Remove and reattach battery". I have tried taking the battery out and putting it back in, but the same message keeps flashing. The camera will not turn off while this message is up unless I unplug it. It looks like lots of other people have had this problem--how do I fix it?
  
  
• Re: JVC service or questions Craig Conditt - 17th Nov 2004 20:31
  Stacy:
  
  My GR-AXM225 camcorder is in safeguard mode and won't let me eject the tape that's in there. I'm wanting to use it for a party this weekend but can't afford to take it to a shop (currently unemployed). Is there a "quick fix" to get me by? I read on a blog about a guy using rubbing alchol to clean off something inside, but that assumes getting the tape ejected. Please reply as soon as possible; thanks!
  
  Craig
  Richardson, TX
  
  
  • Re[2]: JVC service or questions Mike Hill - 1st Mar 2005 0:40
    Hey Craig, Sorry I can't help with the cam-corder thingy, but was wondering how you were doing?! Have you moved? take care, dear friend, Mike Nashville, TN 28 February, 2005
    
    
• Re: JVC service or questions mike - 17th Nov 2004 22:33
  i have a jvc tv modle # av-32d501 and when i press the power button will try to come on and the relay will click but nothing happens i checked the h out and the regultar and every looks good no shorts in the ps can you help me please
  
  thank you