JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions
  Edwin Burgos
  - 15th Nov 2004 20:44
  No tengo buen conocimiento acerca del manejo de mi JVC KD-SX980, necesito un manual de instrucciones.
  
  Gracias.
  
  
• Re: JVC service or questions
  Edwin Burgos
  - 15th Nov 2004 20:49
  No tengo buen conocimiento acerca del manejo de mi JVC KD-SX980, necesito un manual de instrucciones.
  
  Gracias.
  
  
• Re: JVC service or questions David Thijs - 15th Nov 2004 23:14
  Hello,
  
  I've got a JVC MX-S2 compact component system. The cd player is broken for a couple of years now. It seems that it doesn't detect the cd anymore and it won't spin. I've got reasonable experience in electronics but I'm not able to trace the fault without any schematics. The laser beam is ok. Probably the focus...
  
  What's your opinion ?
  
  Thnx
  
  David Thijs
  Belgium
  
  
  • Re: Re: JVC service or questions raleigh - 7th Dec 2004 5:32
    I have the same problem as David Thijs on his JVC-MX-S2. His question is on your web-site dated Nov. 15th 2004. I'm not as experienced as he is when it comes to electronics.
    
    
• Re: JVC service or questions
  Tom Vaughan
  - 16th Nov 2004 1:47
  My Girfriend bought a used JVC GR-AXM300 and we are having a problem with it staying on. We have even purchased a new battery pack and the problem still happens.It acts like the battery does not hold the charge, we do not have the DC adapter so i can't trouble shoot it with that adapter. The unit comes on for about 5 seconds and then shuts off.
  
  
• Re: JVC service or questions
  Tom
  - 16th Nov 2004 3:18
  What is the best zoom/focus control for non-studio use for the GY DV500 with a Canon YH13x7.5 lense? Thanks
  
  
• Re: JVC service or questions
  Brad
  - 16th Nov 2004 4:19
  Is there a fuse in the jvc dvl-820u and can I get to it?
  
  
• Re: JVC service or questions
  Brad
  - 16th Nov 2004 4:21
  Is the a fuse for the dvl-820u and can I get to it?
  
  Thank you
  
  
  • Re: Re: JVC service or questions
    Unknown
    - 22nd Nov 2004 6:46
    No...unfortunatly the fuses are soldered onto the main board in the camcorder. You will have to have a service center take care of that. Call (800) 252-5722 for your nearest service facility or go on-line to JVC.com under service and support.
    
    
• a problem in a digital jvc camera uday - 16th Nov 2004 5:44
  I bought a JVC digital video camera of a model no.:
  GR-D70U, serial no.: 148W1947.
  I bought this camera from California/USA and now I live in Baghdad/Iraq, note that there is no branch for JVC in Baghdad.
  Now I have the following problem with the camera:
  An error indication (E04 UNIT IN SAFEGUARD MODE) appears, and another indication told me to EJECT AND REINSERT TAPE. I tried to eject the tape by open the door of the tape but there is no response from the camera.
  So please can you help me to solve this problem knowing that I didn’t use the camera just two times.
  I am an electronic engineer and may be I can solve the problem if you advise me, knowing that it is difficult to send the camera out of Iraq because of the situation in Iraq.
  If it’s impossible to solve the problem in Iraq can you told me which is the nearest service center for me to solve the problem.
  
  
• Re: JVC service or questions Dan Placial - 16th Nov 2004 8:01
  I have a GR-DVL805
  My LCD screen stays blue when I am playing a tape that I know has video recorded on it. What is the problem and why is this happening?
  Please help
  
  
• I need to have the door repaired where you load the tape Linda Meredith - 16th Nov 2004 14:23
  Where could I send my camera to and have it repaired