Re: SONY ORIGINAL PARTS

i have a Sony DVP-NC600 5-Disc Carousel Changer the motor that spins the dvd has stopped spinning.

can i replace just that motor or will i have to replace the whole lens assembly?

PNs

khm-2

40aaa
20z13ca
222471

thank you

Reply

• Re[2]: SONY ORIGINAL PARTS
  Eric Hibbs
  - 26th Mar 2005 17:59
  I have the same player and just started having the same issue. I have had pretty good luck with Sony's products in the past. I have not yet found the motor alone. if I do, I will let you know.
  
  
• Re[2]: SONY ORIGINAL PARTS john howard - 11th Apr 2005 16:38
  I just came across the same problem with my DVP-NC600. It showed error code E:27 00. When I took it apart to find the problem, it's only the drive belt that broke. I'm currently looking for a new drive belt.
  
  
  • Re[3]: SONY ORIGINAL PARTS Marshall DeNys - 6th Apr 2008 1:17
    I have the E2700 code, but haven't taken it apart yet. Is it worth repairing?
    
    
• Re[2]: SONY ORIGINAL PARTS
  Eric Hibbs
  - 17th Apr 2005 16:56
  I replaced the whole laser pickup. I found it for a pretty good price here:
  
  http://www.electronix.com/catalog/advanced_search_result.php?ELECTRONIX_CATALOG_SESSID=9f73bd21c5b7559d9610bff9df261fc3&keywords=khm-240aaa&x=0&y=0
  
  Now it spins just fine. The only problem is that I think I damaged the gold colored ribbon cable so after a few seconds I get an error saying that there is no disk. I can't find a part number on the damaged cable. Some luck.
  
  
  • Re[3]: SONY ORIGINAL PARTS
    Michelle Bokmeyer
    - 7th May 2005 20:58
    Eric, I initially had the "no disk" error: make sure the top (white) plastic is also spinning...usually a light touch will realign it. I had the "no disk" problem first, NOW the disks have stopped spinning entirely, and I'm looking for a replacement drive. Thanks for the link!
    
    
  • Re[3]: SONY ORIGINAL PARTS
    michelle bokmeyer
    - 7th Jun 2005 16:10
    Eric, OK, my last reply was ignorant. There is a solder short on the top side of the circuit board that needs to be removed. Remove it and the DVD player will stop saying 'no disc'.
    
    
    • Re[4]: SONY ORIGINAL PARTS Dana - 20th Jul 2008 23:41
      I have a DVP-n600 with the dreaded "no disc" error that just started to occur, player reads dvd's but not cd or cd-r. Think it's the same solder short you mentioned? if so, can you tell my how to find it; if not any other thoughts? Thanks for any help you can give. Dan
      
      
  • Re[3]: SONY ORIGINAL PARTS Sparky - 25th Jan 2006 1:49
    I purchased the replacement part for the Sony CD/DVD Player, somehow I was still getting a Insert Disk Error, I compared the two part replacements and find out that the Spin Motor was the correct part, but the laser beam module was not. Since my DVD Laser was still operational, I swapped out the spin motor only. I got it to work perfectly.