Error Codes Assistance

Assistance for Error Codes

If anyone is having any kind of Error code, clean head icon or any other concern, contact me first before assuming you have a problem. My e-mail is Ssample@jvc.com.

I am knowledgeable and have helped many people past their error codes without service. Several things can cause error codes and I would be more than happy to assist you in determining if you do indeed have a problem and what options you have available.

Please refer to this site if you contact me. Thank you.

Stacy Sample
Service Coordinator
Houston, Texas

Reply

• Re: Error Codes Assistance
  govindaraj
  - 20th Jul 2008 4:40
  hi
  
  i found a problem when reinstalling my windows xp operating system,i receive the error code 403.i cannt able to retrive my os.
  
  there is a another problem when i try to install this as first,i have a problem when installing windows cannt be worked...........
  
  what can i do for that?
  
  give the solution/..............
  
  
• Re: Error Codes Assistance Lou - 23rd Jul 2008 0:18
  I have a 2001 Nissan Maxima with the factory bose system. When I put a cd in, it says error. Someone told me that they think its the car security and needs a code to punch in. Is this true? Please help!!
  
  
• Re: Error Codes Assistance Mario - 23rd Jul 2008 5:45
  My JVC GR-D27OU took a small fall to the floor. It shows a great display, but it will not record because it is stuck in safe mode. I have reinserted the tape, reseated the battery, etc. Nothing seems to work.
  Do you have any input into this problem?
  Thank you.
  
  
• Re: Error Codes Assistance
  Giuseppe
  - 29th Jul 2008 5:20
  Ciao.
  My vcr still don't run and it shows code f04, do you can say me what's the problem ? I'm italian excuse for my bad english.
  Thanks.
  
  
• Re: Error Codes Assistance David Swendsen - 29th Jul 2008 21:44
  Hello,
  
  I see this is an old post, so you may not be here any more, but here goes. I sent back my DCR PC120bt a couple of years ago on the national recall because of a faulty chip. They repaired it and it worked fine the one time I used it. Now I get the 31:23 error code.
  
  I have 1. removed the battery, 2. switched tapes, 3. took a blog advice and slapped the heck out of it. Nothing. I do not get the error when the tape is removed.
  
  I love this camera, and it was hardly used. Any ideas would be greatly appreciated.
  
  Dave Swendsen
  
  
• Re: Error Codes Assistance
  bernie bolisnki
  - 29th Jul 2008 23:14
  my son has a 2004 audi a4 with 6 disk cd changer. when you attempt to play the cd it is always stuck on "cd 4", tries to start playing and after about 1 minute it says: "error code 3".
  
  any ideas?
  
  
• Re: Error Codes Assistance F61 Gary - 1st Aug 2008 5:08
  I got your name from the Perchorin's site.
  
  The Panasonic SA HT67 drives the speakers in my little home theater setup. A couple of weeks ago we began hearing a loud pop and the unit would shut off. We would turn it back on, apparently with no problems. This happened a half dozen times. Two days ago the unit suddenly shut off. When we try to turn it back on we get an F61 error code before shutdown. This happens repeatedly, even after disconnecting all speaker wires, etc. Twice after I removed and put back the rca speaker cables it came back on, once for a day, the other for an hour or so. Now we get the same code no matter what I do.
  Any ideas for fixing it besides a big hammer? Thanks!
  
  
• Re: Error Codes Assistance stacey - 2nd Aug 2008 19:44
  I recently bought an acoustic solutions head unit (ics-60) from argos, in general the stereo works fine however when i come to play a mp3 cd it displays error 2. any help and advice would be much appreciated as to whether its me or the head unit thats faulty
  
  
• Re: Error Codes Assistance daniel - 2nd Aug 2008 20:50
  yes my camra has a problem ever time i turn it on it sed disk error c:13:03
  can you please help me
  
  
• Re: Error Codes Assistance
  Tawanda
  - 2nd Aug 2008 22:36
  I have a cyber shot dsc-p32 with e:61:00 and the screen seems to be blurry what do i do? thanks