Error Codes Assistance

Assistance for Error Codes

If anyone is having any kind of Error code, clean head icon or any other concern, contact me first before assuming you have a problem. My e-mail is Ssample@jvc.com.

I am knowledgeable and have helped many people past their error codes without service. Several things can cause error codes and I would be more than happy to assist you in determining if you do indeed have a problem and what options you have available.

Please refer to this site if you contact me. Thank you.

Stacy Sample
Service Coordinator
Houston, Texas

Reply

• Re: Error Codes Assistance
  Bob
  - 4th Dec 2008 19:02
  Hello Stacy,
  
  I obtained your email address from the Error Code Assistance website.
  My SONY 960 HF VCR worked fine then suddenly displayed the code 3L 22 AA.
  Since that time is won’t play, record etc. The mechanism starts and then
  stops after a few seconds.
  
  I have tried disconnecting the power source to no avail.
  
  Do you have any ideas?
  
  Thanks,
  
  
  Bob
  
  
• Re: Error Codes Assistance Alex - 8th Dec 2008 4:11
  I have a Sony DCR-HC38. The camera is about one year old. Today after I ejected a tape I was not able to close the tape door. Immediately after I got the error code C:32:11. Sometimes I also get the message "replace power supply" even though the charger cord is plugged in. I've tried resetting the camera, removing the battery. I even tried removing the battery and replacing it while holding the tape compartment manually closed. Not sure what else I can do.
  
  Any help is greatly appreciated.
  
  -Alex
  
  
• Re: Error Codes Assistance
  mario ciatti
  - 8th Dec 2008 16:32
  I have a 2003 hyundai santa fe with a 6 disc monsoon in dash cd changer. Everytime I try to insert a cd it says the changer is full. When i try to eject the cd's i can hear the cd's shuffle inside but nothing ejects. when i try this a few times, the display comes up as a cd player error. I can't figure out what the problem is.
  
  
• Re: Error Codes Assistance zach - 9th Dec 2008 3:23
  ya i have a 2000 grand prix and a few days ago i was listening to a cd then it spits it out and says E20 what does that mean
  
  
• Re: Error Codes Assistance linsonghuy - 9th Dec 2008 9:16
  Hi , I used marching duplicator ( priport ) VT5329 .
  I need you help me How I can open program , because I used 107 alread , it still cannot
  Thank alot
  Lin
  
  
• Error Codes Assistance Rizan - 10th Dec 2008 16:48
  Need your help really bad, an error C: 13:02 is being flickering on my DCR-DVD653e, and im unable to transfer the file to my pc as well.. - Best Regds, rizan
  
  
• Re: Error Codes Assistance
  NVM
  - 11th Dec 2008 6:45
  I have a Fisher DAC-2403 CD Changer with a RDAC-2403 wireless remote control.
  Now when I load a disk I get the "M" error. I removed the top of the case and can see that the disk moves around to the playing postion, but does not enter the player area. The "M" error then starts to scroll. Any ideas?
  
  
• Re: Error Codes Assistance Laura C. Jackson - 13th Dec 2008 5:17
  I have a 95 Cutlass Supreme ,I'm getting error 20.The radio plays and the tape player when I try to play a CD,then it comes back out.Can you help me
  
  
• Re: Error Codes Assistance Gillian Powell - 13th Dec 2008 15:57
  I found your email address on Pechorin's website and wondered if you could help me i am getting an error message of ER-07 on my cd player can tell me what this means and can i repair it.
  
  many thanks
  
  Gill Powell
  
  
• Re: Error Codes Assistance JR - 13th Dec 2008 21:58
  Hey I have a '99 grand prix radio that is displaying E20 when I insert any cd in the drive. Can you please help me? JR