JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Alan - 1st Feb 2005 4:57
  I've had my GR-DVL310 miniDV camera for about three years. When it works, it's a nice camera. But I've already sent it back to correct one problem (under warranty), and it appears that same problem is back. It turns on, but then says "EO4 - UNIT IN SAFEGUARD MODE REMOVE AND REATTACH BATTERY," which of course does nothing. The error is in every mode (A, M, Play) and recurs whether the battery is charged or not, even when the power adapter is plugged in. What's more, the viewfinder doesn't work, even when the screen is folded in. Please let me know if I can do something to reset the camera, or how much it would be to send it in for repair, as I'm sure the warranty has expired. Thank you.
  
  
• Re: JVC service or questions Sandy Bernhardt - 1st Feb 2005 5:34
  My product is JVC DR-MV1 vcr/dvd recorder. I am trying to
  record my taped home movie to dvd-R. I follow each instruction in order they are written and after pressing
  dubbing for the two seconds it seems as though it might
  start recording but then "no signal" comes up on the tv
  screen. Aslo I would like to know how long is takes to
  copy a 2 hour tape to dvd. Thank you
  
  
• Re: JVC service or questions Sandy Bernhardt - 1st Feb 2005 5:38
  My machine is a JVC DR-MV1 Video/DVD recorder. I am
  trying to record my VHS-C home movie to dvd. I follow
  the instructions in order written and when I push the dubbing button the machine seems to start recording but
  then I get a "no signal" message on my tv and the machine
  shuts off. Also how long will it take my machine to record
  a two hour video tape? Thank you
  
  
• Re: JVC service or questions Shashikant Shukla - 1st Feb 2005 7:56
  Dear Sir,
  I had purchased a JVC digital Still camera GC QD 5. Once when I lost its CD I had to down load the driver from the net. It brought a lot of viruses with it to the extent that either the camera programme has corrupted. The problem is that when we take pictures around 20% of them gets corrupted every time . I formatted it also many times but to no use. I am in India. How can you help me.
  Shashikant shukla
  
  
• Re: JVC service or questions daniel lares - 1st Feb 2005 15:45
  i would like to know how do i get a owners manual for my camcorder model# gr-sxm250u asap thanks d.a.l. el paso texas
  
  
• Re: JVC service or questions Nitin Bankar - 1st Feb 2005 15:57
  I have JVC GR Camcorder. Its cable strip which connects the LCD Monitor9 Screen ) to camera is slightly damaged. Due to this if i opens the screen at 90 degree the picture does not appears. But if i open upto 45 degree the picture appears but the image is blurred with faint colours. In INDIA the part is not available. How will you help me.
  
  
• Re: JVC service or questions Bob Gorman - 1st Feb 2005 15:59
  Help, we just moved and while setting up the tv without the remote, i somehow accidently locked out the channels and then this morning I couldn't even get the menu button to work on the front of the tv...any ideas??????? Thanks!
  
  
• Re: JVC service or questions
  desbele br
  - 1st Feb 2005 17:20
  the screen becomes narow and narow from top andbotom after 1minut.
  
  
• Re: JVC service or questions Randy Abernathy - 1st Feb 2005 19:04
  I have a JVC AV-27730 that has lost the picture. Only a thin horizontal line. I need to know which part is the vertical output ic and which capacitors around it to replace as I'm sure that's the problem. When the problem first occurred it returned to normal after leaving off overnight. That cycle repeated for a few weeks until now. It no-longer recovers by leaving it turned off overnight. I am planning to replace the vertical output and supporting electrolytic caps.
  
  Thank you.
  
  
• Re: JVC service or questions
  Kenny L
  - 1st Feb 2005 19:53
  My JVC GR-D30US will not charge the battery. I purchased a new battery, but that one doesn't work either. The charge light blinks a few times then goes off and the battery never re-charges. I don't have an external charger. Do I need to take my unit to a repair shop?