JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Dr. R. Chandra Sekaran - 10th Feb 2005 9:03
  I have JVC Digital Video Camera GR -D 33 AG. I am unable to see any objects through the viewfinder or through the LCD even when the power is on or off. Threrby when I record no images are recorded and only sound gets recorded.
  I have set everything to Factory setting.
  Thanks if you can help me.
  Regards
  ChandraS
  
  
• Re: JVC service or questions
  Paul Schaefer
  - 10th Feb 2005 22:52
  My camcorder model sxm250u appears to recording fine but when I attempt to view the recording its completely scrambled. I tried different vcrs' and Ive tried different video tapes. Is there a setting that I may have changed or maybe one I should change?
  
  
  • Re[2]: JVC service or questions
    Mike
    - 29th May 2006 22:22
    Hi Paul ! If this message is not to late,the problem you are having is probably that you have your camcorder tape setting on "S-VHS". A standard "VHS" vcr will not play S-VHS tapes. You need to change the setting on your camcorder to "VHS" instead of "S-VHS" or SVHS-ET". Otherwise you will need a "S-VHS" vcr. Hope this helps. Mike
    
    
• Re: JVC service or questions Mark Verdi - 11th Feb 2005 17:54
  Stacy,
  Hope you can help with questions re AV32S585.
  
  1- When powering up, tv makes a loud almost popping noise, have been told that it is due to voltage in tube. Is this 'normal' for this model?
  
  2- When watching non-HD channels, I still get the bands on the top and bottom of screen making the non-hd 4:3 16:9. Unless I choose hd zoom to take up the whole screen, then I lose out on picture size for non HD. Cant the tv get regular 4:3 when watching regular channels without the zoom mode?? Thanks
  
  
• Re: JVC service or questions Mark Fischer - 13th Feb 2005 15:08
  Hi Stacy,
  
  Thanks in advance your your help. I have a JVC GR-SXM730U camcorder. I have spent the last week playing tapes and capturing them to burn to DVDs. With the last tape, I have received a E03 error code.
  
  What does it mean, and what is the remedy. I would appreciate it if you would email me the answers.
  
  Thanks,
  Mark
  
  
• JVC GR-DVL300 camcorder firewire problem
  Tibor
  - 13th Feb 2005 17:56
  Hi,
  
  My JVC GR-DVL300 camcorder is not recognized anymore by my PC as it used to be. The camcorder is connected to the computer by an OHCI complient firewire (ieee1394) PCI card (VIA chipset). Is there any service code or similar to get some debug info on errors? The camera seems to be unable to communicate now.
  
  Thank you in advance.
  
  Regards,
  Tibor
  
  
• Re: JVC service or questions
  Joseph Saltiel
  - 13th Feb 2005 21:42
  I have a JVC VHS CAMCORDER Model GR-AXM4U. The LCD monitor is not working, the viewfinder is working. How much will it cost to fix it?
  
  
• Re: JVC service or questions Chantal - 14th Feb 2005 0:32
  I bought my VCR in July 2004. Three months later, the loading problem appeared. JVC kept my VCR one month. Three days later, the same problem appeared. The store gave me a new one. And yesterday (02/13/05), again the loading error!
  
  
• Re: JVC service or questions
  david sheen
  - 14th Feb 2005 21:41
  I have a 5 year old JVC AV28WFT1EK which now has a strong green tinge to the screen. Can I balance this out by using the service menu to increase the red output, and if so how? At the moment all I can do is adjust the blue output
  
  Any help gratefully received
  
  David Sheen
  
  
• Re: JVC service or questions Rick Gaudreau - 15th Feb 2005 5:11
  I have a JVC AV-56WP30 Projection TV. It was working fine in the morning, the kids turned it on after school and the top left corner of the screen had a redish purple arc through it! I proceeded to check the convergence and it looks like the screen color it part of the problem. The top left and top center cross hair are off, including the lower right corner cross-hair. All the other are fine. The centre top green cross-hair is not only off but the horizontale line through the cross-hair is tilted from left to right (lower on the left side). The bottom right cross-hair tilts the opposite way. All the vertical lines seem fine.
  
  Can you give me any ideas on what I should be checking next or whether I should call a service person. I have worked in Televisions before and have a college diploma in Audio Visual with good electronic background but am far from being an expert. I can follow electronic schematics with minimum difficulty. I will be phoning JVC tomorrow and see if I can order the complete service manual for the TV, but I won't receive it for a few weeks because of where I am situated. Any help would be greatly appreciated.
  
  Thanks.
  
  Rick
  
  
• Re: JVC service or questions harsh - 15th Feb 2005 18:28
  i have jvc cd player which is not working now i think some inside prob. can you give me it's authrised service ealer in delhi or near by delhi address and tel no. to contact them for service?
  
  thx