JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Yosef Gofer - 28th Oct 2006 7:35
  Need repair manual (the page for replacing CCD Base ASSY) or parts list for GR D33U
  
  
• Re: JVC service or questions Kelly - 28th Oct 2006 18:21
  Hi, I have a JVC GR-D200U mini DV camcorder. My problem is it shows power but no controls work. I can't get the tape out, get it to play, rewind nothing. Nothing show up on either screen and acts as though no buttons are being pushed. At the very least I would like to get my tape out before trashing this recorder. Any help would be appreciated. Thank you in advance.
  
  
• Re: JVC service or questions
  Dave
  - 29th Oct 2006 3:15
  I have a jvc gr d270u digital camcorder, I recored a video and I can't seem to put the video on disc on my computer, or download the video onto my computer, I was told I needed to buy and video cord which I did, I still cant download my video or maybe I just dont know what Im doing, can you help me please.?
  
  
• Re: JVC service or questions
  Lourdes
  - 29th Oct 2006 14:38
  I have a MiniDV JVC GR-D73U camcoder, my problem is i dont know how to transfer the still videos from tape to pc and burn it into VCD or DVD. I already install the Image mixer 1.7 but camcorder cannot detect, but if i switch video to memory, it detect easily and transfer the still images using Adobe photo. Why is that wen i switch it back to video and try to transfer the captured videos from tape, the camcorder cannot be detected by the image mixer. wat will i do?
  
  
• Re: JVC service or questions Pat Bailey - 30th Oct 2006 1:34
  I have a JVC AV-27920 and it turns on for 5 seconds then turns off, then the on timer light blinks. Do you know what could cause this and if its worth it to fix it? Thanks
  
  
• Re: JVC service or questions
  Terry Williams
  - 30th Oct 2006 5:25
  I have a JVC gr-dx77u and it has a problem that many others like it seem to have. The zoom is stuck all of the way in. I can manually back it up, but as soon as I let it go it zooms in again.
  
  What can be done? This should have been a recall it seems to me.
  
  
• Re: JVC service or questions
  Mary Ellen Monte-Lovelace
  - 30th Oct 2006 6:44
  My JVC tv model #AV-20f703 only shows the basic channels 2,3,4,5, and 6. The remaining cable stations come in black & white with no sound. I checked all the connections. Connected the 17" LCD tv to the same cable and it works fine.
  So we can illiminate the cable connection/service as the problem.
  tried changing the batteries in the remote control also.
  
  
• Re: JVC service or questions Conor Faughnan - 30th Oct 2006 12:05
  Hi there -
  
  I have a JVC TV model no. AV28T25EIS. I'm in Dublin, Ireland. The TV is three years old, and as of yesterday it has a sound fault. The sound comes on full blast and does not respond to the volume control. The volume infobar appears on the screen and can be adjusted up and down with the remote, but it does not affect the speakers which keep blasting away. Also, the infobar has a little speaker icon on it which is normally lit up in a yellow colour, but is not now. the mute button also doesn't work; it calls up the little mute icon to the screen bit does not affect the sound.
  
  Its as if the TV volume control has been turned off by software, but I can't find anything in any of the menus to restore it.
  
  Any ideas?
  
  Conor
  
  
• TV Remote
  Harold F. Beck
  - 30th Oct 2006 13:56
  We have both a TV and a VHS player and are very pleased with both but we do not have the instruction sheet to operate the remote. If possible please send me one at 1007 Ottawa Street, Leavenworth, KS. 66048=l830. If theres a small charge I will send a check by return mail. In the meantime if you could guide me by return E=Mail how to solve the following problems I would very much appreciate it. We have one station we have a picture but no voice. we have another station that the voice is coming through in Spanish. On the setup modethe TV is English,but why is the language Spanish just on this one station. Please tell me how to change the language and un-mute thje other station. Thank you very much for your instructions.
  
  
• Re: JVC service or questions
  Marva Otis
  - 30th Oct 2006 23:08
  I have had my JVC camcorder for about 9 months now. All of a sudden it started showing this E01 unit in safeguard mode attach and reattach battery.
  
  Please Help
  Marva Otis