JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Joanna - 14th May 2009 15:41
  How would I go about getting the both screen & screen saver for a 48"hdtv jvc mod#7302JVN
  
  
• Re: JVC service or questions
  apostolos
  - 16th May 2009 23:08
  Hi
  I currently own a JVC Model grdvm50u camcorder. I was wondering where i can purchase the schematic for the camera. I am capable of repairing it and the warranty has run out. Please let me know
  Thanks
  Apostolos
  
  
• Re: JVC service or questions Donald Buch - 16th May 2009 23:28
  tv keeps making a clicking sound no picture or sound have to leavit unpluged in order to stop it.
  
  
• Re: JVC service or questions Kelly McWilliams - 17th May 2009 12:46
  I have a JVC UX-G70 stereo which is about a year and a half old and i went to put a DVD on to watch it but the disc has jammed and ths display is reading 'tray err" i cant change discs or eject. this seems to be a common problem so i am hoping it can be fixed. Any advice you could offer would be greatly appreciated
  
  Thanks
  
  kelly
  
  
• Re: JVC service or questions Eileen - 17th May 2009 22:30
  I have the JVC GZ-MG155U hard disk camcorder. I believe I am following directions. Hooking the usb to camcorder then to computer. selecting to transfer stuff from hard disk to dvd and it says to connect my usb. UGHHH. Tried everything.
  
  
• Re: JVC service or questions Angela Coker - 18th May 2009 22:10
  I have a JVC I'art Pro 48-inch rear projection TV that will not come on.
  When the power is turned on, you hear rhythmic pulses that change, sounds like it's going to explode and then will not turn off without being unplugged.
  
  Any suggestions would be greatly appreciated.
  
  Angela
  
  
• Re: JVC service or questions Tempia Cowan - 18th May 2009 23:10
  I have a GR-D350u JVC min video camera and it keeps saying unit in safeguard mode 03. I am repeatedly inserting and re-inserting the tape but to no avail. Can you please please tell me what to do? thank you so much.
  
  
• Re: JVC service or questions
  Lonnie St.Julien
  - 19th May 2009 2:51
  I HAVE JVC GZ-MG330AU I WANT TO PLAY MY VIDEO ON MY PC
  
  
• Re: JVC service or questions Terry Hoffman - 19th May 2009 3:07
  We own a JVC Model Gr-D70U that displays a condensation error message. From various sites on the internet, it appears this is a common problem. Several appear to have corrected the problem by disconnecting the cable sensor. Please provide a camera schematic indicating the location of the sensor so we can repair the camera.
  
  
• Re: JVC service or questions
  William C. Currlin
  - 19th May 2009 22:50
  I have a DVD Video Recorder & VHS Recorder model number DR-MV1S that always semmed to run hot, but worked perfectly in play and recording modes. About three months ago it started turning off by itself after 2 or 3 days on stand-by mode or about 2 to 3 hours of play or record modes. A blinking "loading" message was displayed but it would never turned on unless it was turned off manually and turned on again after a few hours. After about 15 minutes of "loading" mode it turns on, operates perfectly and goes back to turning itself off.
  I'll apreciate any help on determining the cause and posible repair options
  Thankyou.