|
Start
Up
|
|
Error Codes Assistance
Stacy Sample - 22nd Jan 2004 19:31
Assistance for Error Codes
If anyone is having any kind of Error code, clean head icon or any other concern, contact me first before assuming you have a problem. My e-mail is Ssample@jvc.com.
I am knowledgeable and have helped many people past their error codes without service. Several things can cause error codes and I would be more than happy to assist you in determining if you do indeed have a problem and what options you have available.
Please refer to this site if you contact me. Thank you.
Stacy Sample Service Coordinator Houston, Texas
Reply
Pages: « 1 2 3 … 168 169 170 171 172 173 174 175 176 177 178 179 »
- Re: Error Codes Assistance Anton - 14th Jun 2009 11:13
Sir, I have problem with SONY VCR, SLV-SE630E. Vhen I push the button "TEST" then to appears on display error code 7E57. Could you please find a solution for this problem. Thank You Regards Anton
- Re: Error Codes Assistance
Dakota Rohling - 15th Jun 2009 3:13 I have a pentax Optio E60 digital camera and the other day i turned it on to take a pic. and got "lens error 0x04110000" across the screen, its just been sitting in the case since the last time it was used so i don't know what the problem is...any suggestions?
- Re: Error Codes Assistance
Kenny - 17th Jun 2009 1:31 Hi, my Sony Handycam is DVD803E. I am getting C:13:02 error. Can you please help? Thanks. Kenny.
- Re: Error Codes Assistance
Gretchen - 17th Jun 2009 14:40 I have a 2003 Nissan Maxima with a Boise sound system (6 CD changer, cassette & AM/FM radio). When I insert a CD(s) I get an error message: F3 and the nothing will play. After I eject the CD the changer clicks 4 or 5 times. This happened suddenly. The CD changer was working just fine, then just quit. The radio is fine. Any suggestions would be greatly appreciated.
- Re: Error Codes Assistance
fred Anderson - 18th Jun 2009 19:41 I have a sony dsr-25 DV Cam recorder-player and recently started constantly flashing error code c:21:00 which indicates moisture condensation. The manual says to take out tape and wait one hour with the machine on. The machine has not had a tape in it and has flashed the error for much longer than one hour and continues to flash the error. Is there an internal battery for the machine that needs to reset or do I need to take a hair dryer to the unit? I have hardly used the machine and it stays in an air conditioned room so I am not sure why the error message occurs. Do you know of a fix to keep me from having to send the unit off to a repair facility and pay someone lots of money to reset it? I have had the heads replaced one time and had no problem with it until recently. Thanks for any help that you can give me.
- Re: Error Codes Assistance Missy - 18th Jun 2009 21:17
I have a Kodak V1073 and it's giving me a error code L02. I was using the zoom in/out button and the screen turned white and shut off??
- Re: Error Codes Assistance JR - 21st Jun 2009 14:43
Hi, I have a problem with my Sony DCR-DVD201E Code 13:00, can you help me? I am from Germany Thanks
- Re: Error Codes Assistance manuel martinez - 23rd Jun 2009 4:12
dear sir i have a SONY HDR FX1E i have been working with video cameras for over 28 years i bought this camera here in gibraltar ever since i bought this camera first i had the problem of head clogging then in the middle of a job i was doing the camera just went off comletly so i had to take this camera to my nearest dealer wich is in seville i got it fixed and i had a few things changed one of the was the tape loader i got this last october so i tested the camera and it was ok but i did not use this till may no the camera is giving me an error which says please reinsert tape noe sometimes it goes in but 80% of times it dosen't when i go back to the dealer he tells me the guarantee is overdue because it has been 6 months your advise on this would be helpfull to me especially the error thank you very much i hope to here from you thanks
- Re: Error Codes Assistance Mario Fresnillo - 23rd Jun 2009 14:40
My sony ccd-tvr118 show in the screen c:31:22.
thanks for you help.
- Re: Error Codes Assistance Cindie - 24th Jun 2009 20:30
I hope you can help. I bought a retro syle JVC hi fi in 1996 and resently I noticed that when the volume goes up to a certain point the power switches off with an error code reading E61. Can you help?
|