JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Bill Zempel - 14th Sep 2004 3:13
  Just purchased a refurb RX-8030VBK receiver. Worked fine when I set it up. Turned it on and the unit powers up momentarily then shuts down( goes into standby).You can here clicking inside the unit, sound like solenoids or relays powering on or off. The troubleshooting section in the manual says this is an over voltage, take it to a dealer, what gives? Is this easily(inexpensively) repaired?
  
  
• Re: JVC service or questions bill - 14th Sep 2004 4:42
  i have a jvc gr-d201us mini dv camcorder, i couldn\'t find my 12v car charger and used one of those multi-voltage car adaptors to charge my battery, well it didnt have the polarity marked on the plug and i shorted my cam out. is there a fuse inside the cam that is serviceable? or am i going to have to send it to a service center for repair?? thanks in advance....
  
  
• Re: JVC service or questions johnson - 14th Sep 2004 4:44
  I have JVC Camcorder.It is not displaying during the record mode.But in play mode I can see the picture in the screen.Anything I can do it myself or could you please suugest me any local service centre in Chennai , India.
  
  
• picture coming black and white Anoop - 14th Sep 2004 10:26
  Hi! I have just purchased a JVC cam coder, it works perfectly fine but when i paly my recording on TV thn the movies comes fully baln and white mode...on TV. Can anyone suggest me the solution. Or the service center in Delhi, India
  
  
• Re: JVC service or questions babarn - 14th Sep 2004 13:42
  Model: GR-DVP3U
  The eject mechanisim is stuck and will not eject the tape. Is there
  a simple fix I can try before taking it to a service center? I would hate to pay
  $70 to find out it was a simple fix that takes 2 minutes.
  Regards,
  babarn
  
  
• Re: JVC service or questions jeff anyway - 14th Sep 2004 13:46
  ive lost my manual and can set my clock how do i do this
  
  
• Re: JVC service or questions
  Bob Cook
  - 15th Sep 2004 0:31
  HR-XVC1U CONTINALLY FREEZES WHILE PLAYING DVDS. iS THERE A SOFTWARE UPDATE FOR THIS UNIT
  tHANK YOU
  
  
• Re: JVC service or questions
  Keith Reid
  - 15th Sep 2004 1:38
  I have a GRD30U that\'s a little over 1 year old. It will no longer charge the battery when plugged in. The charging light indicates it\'s charging, but after removing the power cord it will not power up.
  I had a spare battery already charged and when I used that battery the camera would work. Once that battery was used it also would not charge.
  When plugged in the camera works fine.
  
  
• Re: JVC service or questions Sheila Turner - 15th Sep 2004 5:55
  My portable 3 disc palyer keeps going back to the first of the CD after only playing a CD for 30 seconds or so.
  
  
• Re: JVC service or questions
  geoff oldham
  - 15th Sep 2004 13:28
  my jvc compact system MX S2 WHEN I LOAD A CD IT REPORTS ERROR NO DISK WHEN I PRESS PLAY IT REJECTS CD
  
  
  • Re[2]: JVC service or questions Mark - 26th Jan 2006 17:07
    Hi did you ever receve an answer to this problem with the CD player on a JVC MX S2? Thanks
    
    
    • Re[3]: JVC service or questions totya - 25th Apr 2008 19:39
      Hi Adjust Gain... (r703)