JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions
  Fabio
  - 3rd Jul 2004 1:16
  Hello,
  I have a camcorder JVC GR-D30U and the specifications says the camcoreder is able to record from the PC using Dv connection (DV input/output), but the manual says it is not capable of doing it. (just DV output). Does someone knows if is it possible to capture a image from the PC???
  
  
  • Re: Re: JVC service or questions Rhonda Shaver - 7th Aug 2004 21:02
    Hello, I have a camcorder JVC GR-D30U and the specifications says the camcoreder is able to record from the PC using Dv connection (DV input/output), but the manual says it is not capable of doing it. (just DV output). Does someone knows if is it possible to capture a image from the PC???
    
    
  • Re: Re: JVC service or questions
    - 1st Sep 2004 11:40
    Yes it can
    
    
    • Re[3]: JVC service or questions
      Mike
      - 19th Sep 2005 21:33
      My Jvc Super Camera has gone into E02 SafeMode How would I go about getting it out of safemode i need it for a big wrestling event coming up for my wrestling group kwa Please Help me Bye
      
        See 1 more comment...
      
      
  • Re[2]: JVC service or questions angelina - 11th Feb 2006 4:42
    hi,i have been trying to record fr tv or vcr and i cant do it but not sure if maybe i need a s video cable. i know i can download to pc w eee 1394 cable. if know how to record fr tv or vcr let me know. Angelina
    
    
• Re: JVC service or questions Mike Collett - 3rd Jul 2004 19:44
  I have a JVC camcorder and I have an error message of EO2 and tape end message even though there is no tape in or if a new one is in. the tape holder won't latch either. can you help.
  
  
  • Re: Re: JVC service or questions Stephanie Fehler - 6th Dec 2004 21:57
    i have this problem too - our camcorder is probably4-5 years old and i really need it to make a video for Christmas for inlaws... please help?
    
    
  • Re: Re: JVC service or questions dee dee - 11th Dec 2004 1:09
    Could you tell me what the E02 error means
    
    
    • Re[3]: JVC service or questions
      Frank
      - 19th Apr 2005 3:40
      Please tell me what EO2 means on my jvc camcorder screen.It will not allow me to record it says that the camera is in safe mode to re-insert battery,i did that but it still does not work. Please tell me what to do Thanks.
      
        See 10 more comments...
      
      
    • Re[3]: JVC service or questions
      mohamed brouch
      - 11th Aug 2006 11:09
      ok this message I wrote it in French and I made the translation on the site google. for the question of error EO2 I have a video camera jvc after my works on a festival and in moment an error message posts EO2. ok I did many things and I made research has the Internet but anything I read for what this message it posts is bad unloading. I know that it is not the battery but on the camera video and to decontaminate the current which is inside the idea which arrives to me is to make the camera with the refrigerator for one night and the morning signal its walk. and I wish you good luck and that it is moving mohamed Morocco
      
      
  • Re[2]: JVC service or questions Bill Boeye - 26th May 2006 14:05
    I have the same problem and after reading several forums fixing the problem seems like spending good after bad. Did you every get your problem fixed?
    
    
• Re: JVC service or questions kimberly - 5th Jul 2004 4:39
  I have a JVC tv model av 27730. When I turn my television on everything is fine, about one minute later the picture goes completely black and a thin bright vertical line appears through the screen. I have no picture at all, but I do have sound. Can you assist me with this problem?
  
  
  • Re: Re: JVC service or questions
    Jim West
    - 10th Sep 2004 2:22
    I have a JVC TV model AV-27730 The TV screen went to a bright line across the center, then to black. There is no sound or picture.
    
    
    • Re[3]: JVC service or questions
      terry
      - 1st Sep 2006 21:57
      I have the same problem. Did you ever get an answer to this question?
      
      
    • Re[3]: JVC service or questions collins M - 19th Mar 2007 21:10
      I have jvc televission it was use to show picture and give sound , this morning when turn it on ,it can't give sound or show piture at all. Please can you you help me solve this problem. C. Toefula
      
      
  • Re: Re: JVC service or questions
    Jim West
    - 10th Sep 2004 13:36
    I need to correct the previous statement. I have a JVC TV model AV-27730 The TV screen went to a bright line across the center, then to black. There is sound but no picture.
    
    
  • Re: Re: JVC service or questions Richard Zengerle - 20th Oct 2004 20:59
    Sounds like a capactor is bad in the vertical output circuit
    
    
    • Re[3]: JVC service or questions
      Tim Johnson
      - 17th Dec 2005 3:25
      Is the compactor the same as the filter caps on the Vert Output? If so, where is this part located, inside the TV, and where can this part be purchased? Thanks!
      
      
    • Re[3]: JVC service or questions
      Sharalyn
      - 7th Jan 2007 2:27
      I I have a GR-DCV210U Camcorder and I hooked it up to the tv all of a sudden lines went through and then when I turned it back on nothing a blank blue screen on the camcorder and television I can see what I would be taping on the screen but I don't know if it is actually taping because when I go to play it back it shows nothing. Help me please.
      
      
  • Re[2]: JVC service or questions don - 27th May 2007 14:48
    Same problem here - anyone ever figure out how to fix? will gladly pay for some help. Thanks
    
    
• Re: JVC service or questions d.valavan - 5th Jul 2004 9:02
  I want know
  the authorised service point of JVC audio and video equipment in Tamil Nadu.
  
  
• Re: JVC service or questions James Hodges - 5th Jul 2004 20:38
  I have a GR-AXM230 VHS C video camera. The camera is about 2-years old. A fully charged battery may only last 5-minutes. I replaced the battery with a 2-hour battery and still have the same problem. Sometimes, I can remove and reinstall the battery and get additional power time. Can you help?
  
  
• Re: JVC service or questions Michel Gauthier - 5th Jul 2004 22:14
  I have this same exact problem with my television. It started two days ago for no know reason and we can't figure out how to remedy it. Please help, this is our only TV and we hope that there is an easy fix. thank you.
  Michel
  
  
• Re: JVC service or questions Michel Gauthier - 5th Jul 2004 22:16
  I have this same exact problem with my television. It started two days ago for no know reason and we can't figure out how to remedy it. Please help, this is our only TV and we hope that there is an easy fix. thank you.
  My TV model is AV-36F702 or 802 i'm not sure.
  Michel
  
  
  • Re: Re: JVC service or questions Richard M Zengerle - 20th Oct 2004 21:03
    It could be the vertical output IC the chip in my AV27730 set cost about $3.00 to buy but I had to have it installed.
    
    
• Re: JVC service or questions Joe - 6th Jul 2004 8:37
  Hello,
  I have a JVC GR-D30U and I get a EO1 message...safeguard mode. What do I do to fix it. Thanks
  
  
  • Re[2]: JVC service or questions Linda - 1st Mar 2005 18:34
    I am getting the same E01 code. It says "Unit is safeguard mode" "Remove and reattach battery" Did you ever figure out what was wrong?
    
    
  • Re[2]: JVC service or questions girlies - 23rd Mar 2008 23:25
    I see that you have the model d30u. did you have any problems on the screen when you turned it on saying " condensation, operation paused? could you please let me know either way.
    
    
• Re: JVC service or questions
  Athena
  - 6th Jul 2004 14:24
  I would like you to help me on one problem for my JVC TV D-series AV20D303. I bought this TV about a year ago. Since last month, it has a problem with turn on / off the TV. The pictures on screen has no problem, working fine. The problem I always have is when I turn it on, I saw the green light on but not the TV. I had to try many times to unplug and plug the jet to turn it on like hiting the lottery (Frustrated). After that, when I wanted to switch it off, however, the green light went off and the TV screen still on but no sound (Mute). I press the "power-on" button again, the light turns on and has sound again (Couldn't shut off). This problem makes me very headache.... I hope you can assist me and help me to find the solution to solve this problem or do I need to buy any electronic stuff to replace inside the TV? I appreciate your kind reply, and look forward to hear from you soon.
  
  
  • Re[2]: JVC service or questions Greg - 9th Jun 2006 19:43
    I have the same problem Did you solve yours???? Cheers Greg
    
    
• Re: JVC service or questions
  terry goins
  - 10th Jul 2004 2:37
  I have a jvc camcorder model # gr-axm225. I get a EO2 error code and the tape will not eject. Unit is no longer under warrantry. I have tried tapping on side of unit. What would you do? Thank you for any help.
  
  
  • Re: Re: JVC service or questions
    Ray
    - 13th Oct 2004 21:36
    I also have a jvc camcorder model# gr-axm225. I get an Error E07.the Camera starts is safeguard Mode, The tape will not Eject, Please help. It is a Tape Of my honeymoon. I would like to salvage it.
    
    
    • Re[3]: JVC service or questions
      hasan
      - 19th Dec 2005 22:31
      I also have a jvc camcorder model# gr-axm225. I get an Error E07.the Camera starts is safeguard Mode, The tape will not Eject, Please help. It is a Tape Of my honeymoon. I would like to salvage it.
      
      
  • Re: Re: JVC service or questions
    V Katkowski
    - 23rd Jan 2005 17:52
    I would like to use my GR-AXM225 in conjunction with my ibook computer. I need a jlip cable and I can’t seem to locate one. My computer has USB connections. Any sugestions?
    
    
    • Re[3]: JVC service or questions MARC - 20th Sep 2007 7:46
      Did you ever find a JLIP cable? I just dusted off my old Mini VHS Camcorder from 1996 and would really like to transfer some clips to the computer via the JLIP port. However, I'm in the same situation you mentioned--no cable. Thanks for any info. Sincerely, Marc