JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Rob Ray - 31st Jul 2004 22:05
  I bought a new jvc vhs recorder/player just last year and now the picture and sound are getting dirty.
  So I tried a Maxwell dry type head cleaner now a total of 8 times. The video's improved a bit, but there's still a flutter sound in the left sound track whenever I record something new. It's not there on older tape recordings. Does the left audio recording head need repair or a better cleaner, or something else?
  
  
  • Re: Re: JVC service or questions Johnny Brown - 31st Oct 2004 5:40
    I have an JVC vhs recorder. Model # 6060u 105 watts. It appears to be in working order. Can you tell me if this a commercial use recorder? Any info will help. Thanks. Johnny
    
    
• Re: JVC service or questions emile - 1st Aug 2004 16:07
  I have an JVC camcorder, GR-DVXE. At one time all of a sudden the display was upside down! I looked in every menu, I cannot get it wright again! I don't have a manual aswell. Do you have a solution?
  
  
• Re: JVC service or questions Jamal - 2nd Aug 2004 8:45
  Hi Stacy,
  I have a JVC GR-DVL800 camcorder. How can I make a vcd or a dvd from the DV cassetes/cartridges. What all hardware (besides a dvd writer) or software do I need to convert my recording from this camcorder model to a vcd or a dvd.
  
  
• Re: JVC service or questions Larry R. Davis - 2nd Aug 2004 22:58
  have a model JVC GR-D70 movie camera which will not turn on. When the AC is plugged into the wall, no charge light. Won't power up. Battery appears to be good. What else could it be? Been used very little, and last time used it a while back, it worked, and now it is dead. Please advise.
  Thanks, Larry Davis (306)-262-9132
  
  
  • Re: Re: JVC service or questions
    Josh Bennett
    - 3rd Aug 2004 4:17
    I have the exact same problem with my GR-DVM75. It was working fine and then it won't respond to any power. Won't turn on. The power supply is producing power and the battery has juice. I've also tried two batteries that worked before. Any help would be greatly appreciated. Josh Bennett (719)683-6699
    
    
    • Re[3]: JVC service or questions Mike - 14th Nov 2009 23:02
      Mike did you ever get this problem fixed, the same thing is happeneing to my JVC....
      
      
    • Re[3]: JVC service or questions Mike - 14th Nov 2009 23:03
      Josh, Did you ever get this problem fixed and if so how????
      
      
  • Re: Re: JVC service or questions
    Rob
    - 2nd Nov 2004 0:47
    I have this same problem. I paid 80 bucks to fix this thing, and it happened again! Frustrating.
    
    
  • Re: Re: JVC service or questions
    Ryan Rojas
    - 17th Dec 2004 23:53
    I have the same excact problem with my jvc gr-d70 camera. Was working fine, changed tape, then everything was dead. The battery's are all good but no charge light when plugged in. Camera won't come on....nothing
    
    
  • Re[2]: JVC service or questions John Melnick - 16th Dec 2005 19:02
    the same thing happened to my JVC GR-DVL520U, I've bought a new battery, but still nothing...
    
    
  • Re[2]: JVC service or questions Brooke - 7th Nov 2006 19:49
    I have a GR DVL 520u The same thing has happened with mine I have the charger plugged in a new battery everything and it won't turn on no matter what! IF ANYBODY HAS ANSWERS PLEASE SHARE THEM!!!!
    
    
  • Re[2]: JVC service or questions
    Tony Barlow
    - 6th Feb 2007 10:32
    Had the same problem with my GRD 70 luckily in the 1st 12 months so got it repaired under warranty. They said that some sort of fuse had blown. Then about 2 weeks out of warranty, same thing happened except this time with an important tape in it. 140 bucks later it worked for about 4 hours use then an error message came up and locked up again. Sent it back but this time they said by the time they received it, it was working. Just plugged it into my PC now and a different error message has come up and it wont load a tape. I think I will throw it against a brick wall, cut my losses and never buy JVC again. $1200 for about 12 hours total use. I should have just hired a camera crew.
    
    
    • Re[3]: JVC service or questions Adam Jansen - 24th Nov 2008 19:55
      Same Problem here, i think i have a GR-D70 and i had it for three years, took excellent care if it, never had any problems, until one day, after charging, it just didn't turn-on or respond to anything!!!! I read something online that said it had a fuse in it but i opened it up but i couldn't find it. please Help!!!!! call 765-623-8981 if you have any helpful tips at all. thank you
      
      
• Re: JVC service or questions
  Dwayne
  - 3rd Aug 2004 0:58
  I have a JVC GR-SXM920U Camcorder. My camera will not work because it had an E04 Code (unit in safeguard mode). What can I do to fix the problem? Thanks.
  
  
  • Re: Re: JVC service or questions Mike - 6th Dec 2004 2:56
    The tape could be stuck to the drum (E04 is a drum error), try a new tape, as long as the old tape comes out.
    
    
• Re: JVC service or questions
  TANUJ SINGH
  - 3rd Aug 2004 6:35
  i cannot get camcorde usb port in india
  
  
• Re: JVC service or questions shiksha kapoor - 4th Aug 2004 4:45
  i want 2 know about service centers in delhi, india
  
  
  • Re[2]: JVC service or questions
    Malvika Agarwal
    - 14th Sep 2009 11:50
    Hi, I saw your query about the JVC repair center in India. I am also looking for the same, I cannot find a USB software and wire for my GR-D230 Video Cam. Kindly let help me on the same.Your response will be very helpful to me. Thanks, Malvika
    
    
• Re: JVC service or questions shiksha kapoor - 4th Aug 2004 4:45
  i want 2 know about the service centers in delhi, india
  
  
• Re: JVC service or questions John Ore - 4th Aug 2004 4:51
  What is an EOS error code?
  Also, is there a JVC camcorder repair shop in El Paso?
  
  
• Re: JVC service or questions
  skumar
  - 4th Aug 2004 8:00
  I have a 29" Flat TV....the problem is bursting sound is coming out of the TV and when it happens the picture goes off and comes back immediately.....what could be the problem??