Convergence problems on AV-48WP30

Can't adjust the red horizontally

Convergenge went out suddenly about a week ago. I can adjust the blue horizontally and vertically. The red will only adjust vertically. However, the horizontal is way out of whack. Any ideas? Thanks

Reply

• Re: Convergence problems on AV-48WP30 Elijah - 16th Jun 2007 16:22
  I have a HV-53 with the same convergence problem. I would highly appreciate if someone could send me schematics, guide and info on the "IC's" that have been mentioned throughout this thread. Thanks in advance!
  
  
• Re: Convergence problems on AV-48WP30
  Ab
  - 23rd Jun 2007 22:40
  Hi Eric,
  
  After reading all the posts I see that you're the oracle on troubleshooting this convergence issue. Do you think you could kindly email me the schematics too? Thanks in advance!
  
  email is abflex2@hotmail.com
  
  
• Re: Convergence problems on AV-48WP30 dan - 26th Jun 2007 22:24
  I'M ALSO HAVING PROBLEMS WITH A MODEL AV-48WP30. NOW THE RED WILL NOT MOVE HORIZONTALY AND APPEARS TO HAVE A CONCAVE DIP IN IT. IT SEEMS TO HAPPEN AFTER SHORTY AFTER THE TV HAS BEEN MOVED. THE FIRST TIME IT HAPPENED WHEN THE TV WAS ONLY 13 MONTHS OLD AND I WAS STILL CHARGED OVER $450 TO REPAIR IT UNDER WARRENTY. 9 MONTHS LATER IT HAPPENED AGAIN AND WAS AGAIN CHARGED $450 TO REPAIR IT FOR THE PART BEING UNDER WARRENTY. NOW THE RETAILER THAT SOLD ME THE SET WANTS TO CHARGE ME $200 FOR ME TO TAKE IT THEIR STORE TO HAVE IT LOOKED AT. (THEY WILL COME PICK IT UP FOR AN ADDITIONAL CHARGE OF $75). ANY IDEAS HOW I MAY TAKE CARE OF THIS MYSELF OR JUST JUNK THE SET?
  
  
• Re: Convergence problems on AV-48WP30 dan - 26th Jun 2007 22:30
  I'M ALSO HAVING PROBLEMS WITH A MODEL AV-48WP30. NOW THE RED WILL NOT MOVE HORIZONTALY AND APPEARS TO HAVE A CONCAVE DIP IN IT. IT SEEMS TO HAPPEN AFTER SHORTY AFTER THE TV HAS BEEN MOVED. COULD SOMEONE SEND ME THE REPAIR INFO PLEASE.
  
  
• Re: Convergence problems on AV-48WP30 Alan - 29th Jul 2007 17:23
  I am having problems with my HV-53PRO as well and would like to know if you can please send me the manual to reset my convergence. There are blue pictures making everything double on my screen. Just started 30 min ago...HELP!!! :)
  
  Alan
  
  
  • Re[2]: Convergence problems on AV-48WP30 rockin - 18th Aug 2007 4:15
    I had a problem with my TV colors not lining up. One day I turned it on and the green was out of wack. I checked this message board and replaced the STK chips, bad soldering and all led to me just giving up on that and buying a whole new Convergence Board ($185). I replaced the missing silver box on the new board and I just plugged this in and though now my Green lines up okay, my red is out of whack. Is there something I am doing wrong? Can anyone help me? Did i miss a step? Frustrated......Bruce
    
    
• Re: Convergence problems on AV-48WP30
  David Miller
  - 23rd Aug 2007 20:18
  Eric,
  
  Can you send me all information I need to repair my convergence problem on my JVC AV-48wp30 television please.
  
  Thank You,
  
  David
  
  
  • Re[2]: Convergence problems on AV-48WP30 Bryan Moscato - 16th Sep 2007 1:12
    Hi, I'm having the same convergence issues with the red horizontal movement. Blue is fine. Can someone please email me the fix? Regards, Bryan Moscato
    
    
• Re: Convergence problems on AV-48WP30 Dan - 25th Aug 2007 23:07
  I'm having the same problem and please send me the fix info.
  Dan
  
  
• Re: Convergence problems on AV-48WP30 Dan - 25th Aug 2007 23:09
  Please send info to fix mine is out too.
  Thanks Dan
  
  
• Re: Convergence problems on AV-48WP30
  arneesa
  - 7th Sep 2007 0:49
  Hi can you help me I have shadows and red lines are showing with the shadow i have a 65 inch jvc screen tv someone told me it could be the convergence
  
  
• Re: Convergence problems on AV-48WP30 Bryan Moscato - 16th Sep 2007 1:02
  I'm having the same convergenge issue where I can't adjust the red horizontally. Blue adjusts fine.
  
  Can I please get a copy of the fix sent to my email as well.
  
  Kindest regards,
  
  Bryan Moscato